FlightofthrCGal

God I wish this was solved. Can you apply the same logic to the layer change code to support the option of changing the seam to randomize for the duration of each layer up to a certain layer? I know Gcode is hard to work with i'm not sure what to say.

A suggestion for a bug fix, or a patch. The spiralize feature will not initiate when "Print each item separately" is chosen.

What i'm looking for is a possible solution within Cura to allow the printing of two separate spiralized objects on a bed with program code recognizing the beginning and ending of each object.

This doesnt seem to be working

arrows point to what i'm injecting -->G0 F9000 X241.99 Y35.25 Z249: this raises to z 249 G0 F9000 X241.99 Y35.25 Z27.6: this lowers back down to starting position M104 S200: starts heater M204 S500: starts acceleration M205 X5 Y5: starts advanced motion TYPE:SUPPORT-INTERFACE G1 F600 Z25.6 G1 F2700 E16

So I need to move to z 249 before printing the support interface, which shows up in layer 157 and in this chunk of code. Its alright if x and y are maintained in position, all I require is moving upward, and then downward. ;LAYER:157 G1 F1200 E2121.33654 G1 F600 Z27.6 G92 E0 T1 G92 E0 M109 S190 M104 T0 S175 M106 S127.5 M204 S5000 G1 F1200 E9.5 G1 F600 Z27.6 G0 F9000 X241.99 Y35.25 Z27.6 M104 S200 M204 S500 M205 X5 Y5 ;TYPE:SUPPORT-INTERFACE G1 F600 Z25.6 G1 F2700 E16 G1 F1500 X112.003 Y35.25 E20.53955 G1 X112.162 Y35.091 E20.54741 G1 X167.005 Y35.092 E22.4627 G1 X241.235 Y35.091 E25.05504 G1 X241.811 Y35.094 E25.07516 G1 X241.984 Y35.228 E25.0828 M204 S5000 M205 X30 Y30 G1 F2700 E18.5828 G0 F9000 X241.243 Y31.79 G0 X112.003 Y31.79 G0 X112.003 Y35.25 M204 S500 M205 X5 Y5 G1 F2700 E25.0828 G1 F1500 X111.977 Y35.275 E25.08406 G1 X111.973 Y36 E25.10938 G1 X242.028 Y36 E29.65131 G1 X242.028 Y36.75 E29.6775 The G1 code trails on from here...

Sorry to comment my own post, I basically need a script to bounce the extruder to a certain z location at a certain layer height, and then return to printing without pausing.

Post processing script to park extruder at Z during layer change I realize that in the post-processing script "pause at layer height" I have the ability to park the extruder at both x location and y location. Is there a post-processing script like this that allows me to park the extruder to z height at layer change?