Jump to content

mariuscapitanu

Member
  • Posts

    4
  • Joined

  • Last visited

Everything posted by mariuscapitanu

  1. Good morning! I have this error on my US5 printer. i followed all the steps and the only solution to solve it is to finally replace the fan. In the attached image I learned that Ultimaker will change the fan fee of charge. I raised I think 4 tickets but since the merge with Makerbot none of my initiated requests have been recorded either answered. is somebody here that can guide me in the right direction? kind regards, Marius
  2. Dears, would you please be so kind and help me with one topic, I have the box shown in the below pictures and after slicing the part I found a problem with a reduced wall thickness starting with the first line after the holes from the side walls. slicer version is 4.11. there is no draft angle on the part and no difference in the wall thickness. with another slicer I have no longer this problem. thank you in advance, Marius
  3. HI, thank you for your feedback! please see attached the file. actually I have to print this file in ABS, 0.25 mm nozzle, to the best resolution I am able, to be within 2% deviation from STL file and solid infill. I was thinking to use Ultimaker breakaway material as support, but I cannot block the supports generated inside the part legs. would be great to have some suggestions from you related to this project. kind regards, Marius UMS5_part3_model_r_0 (1) (1).3mf
  4. Do you know how can I get rid of this support structure from the inner holes? Didn’t been removed with support blockers and has no purpose to be there. Support material is ultimaker breakaway and dual extrusion, Cura 4.8. Thank you!
×
×
  • Create New...