[Override Zhop speed]

On 11/12/2020 at 4:24 PM, GregValiant said:

I think this is what you're looking for.  You didn't mention your printer.  This is for mine...

 

Within the "creality_base.def.json" file in the "Overrides" section is "machine_max_feedrate_z":{"default_value": 10 }, .  That sets the max allowable Z-Hop speed in the Cura settings dialog.

 

Still in the Overrides but down a bit further is "speed_z_hop":{"value": 5 }, and that sets the default number in the Cura settings dialog.  It's what shows until I make a change.

 

If you can find the lines in your definition file - change the max to 25 and the speed to 20, save the file and restart cura.

Forgot to do that, mine is a Sidewinder X1.

[Override Zhop speed]

I've been struggling to tune retracts, and noticed in S3D that I had perfect retraction with 20mm/s z hop speed. However, Cura will not let me set it above 10mm/s. Is there any way I can override that?