herby_custom

I have try it. They dont change the unit. Only try to repair it what they cant do. Thats why i get this used MS. It was they's demo unit. Well it was ok to me because i thought that it is working one.

1. No. My 5s + MS was again in maintaince, i do have allsorts of problems with this machine, and there they update it to 6.2.1. it was over month ago. 23.3.2021 i got it back. all works "normal", Not working printer normal but "my UM S5 normal". More of this later. This all this started to happen after i update cura to 4.9.0 and 4.9.1. I did update S5 firmware to 6.3.0 few weeks ago, cant remember the day, but it didnt help. 2. I have duplicate the "skipped print" in DF and it prints second one normally. So the G-code is there. And it prints like it should. print is flaweles. All that i have sliced now after last "lost print" all have normal g-codes in cura 4.9.1. So the g-code is send ok to printer. And ofc the "duplicate the print" works after that. It just skips randomly. 3. 4.8 and 4.9 g-codes looks similar. For quick look throu i cant find anything that causes this kinda problem. I have find that when i need to remove materia spool and install new one sometimes it trigger this. But not all the time. My printer is what they call "monday"version, really shitti unit. I have owned it 5 months now and this machine have spend 2 months in repairshop. All sorts of errors and failed prints. And the maintaince guy cand find anything wrong. And hi is only UM repair dude in my country... I just cant have my printer sit and sit in his shop week after week.. Is it ok that belts rub in pulleywheels and make squeaking noises? repair guy says that is normal and hi cant do anything abouth it. I dont think it is normal. Here is some of my errors that i had. Not all thou. Maybe this will help. After 1.2.2021 i start to log allmost all errors. There is alot of errors before this ER998, 21times ER999, 19times ER54, 7times ER65, 22times ER64, 5times ER63, 2times ER67, 2times After last visit to repairshop i got all abow. And yes i got my ProBundle back and "working" 27.3 and first print was error. They give me "new"(used) and tested(not) "working" MS... 27.3 Er58 Slot-D, PC, core1 27.3 Er58 Slot-c, pc, core1 27.3 Er65 Slot-D, pc, core1 29.3 Er 58 Slot-D, pc, core1 30.3 Er58 Slot-E, cpe+, core1 31.1 Er58 Slot-E, cpe+, core1 2.4 Er58 Slot-f, pva, core2 4.4 Er58 Slot-e, abs, core1 6.4 Er58 Slot-f, pva, core2 6.4 Er56 Slot-f, pva, core2 9.4 Er65 Slot-b, abs, core1 10.4 Er65 Slot-b, abs, core1 12.4 Er65 Slot-b, cpe+, core1 15.4 Er58 Slot-c, cpe+, core1 17.4 Er58 Slot-d, cpe+, core1 17.4 Er58 Slot-d, abs, core2 19.4 Er58 Slot-e, abs, core1 19.4 Er58 Slot-F, ABS, core2 20.4 Er65 Slot-b, abs, core1 22.4 Er58 Slot-c, cpe+, core1 22.4 Er58 Slot-C, cpe+, core1 1.5 Er65 Slot-D, abs, core 2 Yes all theyar MS relaited problems. So chanching my newly bought ms to this old used unit make away some of the problems but give me same amount of failed prints. Now i only print via alot A to 1core and F to core 2 so i can avoid errors. Because after 3.5 i notice that like that the printer works allmost good. 3k machine and i need to work like this. Well it is working.... After all im still hapy how this printer is printing when hi/she/it is printing. Shuld i make another topic abouth this error list? -Herby

Hi. Im not sure is this right place to this bug or have anyone reported this yet. I really dont know what causes this. After i update Cura to 4.9.0 i have this "bug" that skips prints in que. Not sure if it is Cura bug or DF bug or printer firmware bug. Printer start new job, loads the G-code, then start it's "start routine", load materia, levels the bed, ect. like it would and then just stops, lower bed and start next job in que. No "confirm to remove" or no error or anything. In DF it says that print finished and it shows print time like normal, "Finished 3d 11h 02min" even it have not printed at all. This can cause destruction of print core. I got lucky today when i have ABS print and next was coming CF materia in que and it did this. I dont think i have any change to check g-codes to see if thous print jobs have empty g-code, just start and end routine codes.

Ultimaker materia. Empty spool on tray. Yes Left side. Just like allways in 5.8.2 and it have worked but not anymore. I did try same on next print and then there was no spool and same.

So nothing?? Ok... Quess this is normal then. Nice feature.

6.1.1 firmware. S5 pro bundle. Why i cant load new material in material station when print is going? It do load it in the hole but MS dont "see" it have loaded. it just wait in loading screen.