olila

Thank you very much for the quick answer! The error will not occur after that. With me it was 3* "Change At Z". I missed the icon, but why does Cura think to do that? There is nothing in the settings that changes temperatures?

sorry, I forgot to attach the 3mf file 🙂 ASX1_basev4 - andererSupport.3mf

No, it is a single extruder (artillery sidewinder x1). I have found out that this strange behaviour only occurs when I turn on support The following lines are the errors (it occurs twice and is not reset to the original 245°): ;[CAZD: M104 S190.0 T0 ;:CAZD] then about 6000 lines later (of course depending on the model): ;[CAZD: M104 S210.0 T0 ;:CAZD] I don't know what "CAZD" means either I have attached the complete gcode, these are adapter pieces for the E3D Hemera Extruder, to be on the safe side I will mention the origin here: https://e3d-online.dozuki.com/Guide/Hemera+Artillery+(Evnovo)+Sidewinder+X1+(Up+to+V3)/118 But it also occurs on other prints at the moment, it is not dependent on the imported STL (or own OBJ) files. As I said, if I know it now, it doesn't bother me too much, it would be great if the gcode is directly correct and doesn't need to be checked first (which I could easily automate). Whether this is due to the profile for the printer, or to Cura itself, I can't say at all. But I assume that other users should have the same problem. I just tried something when I wrote the text, the error occurs when I set PETG in Cura, but also when I set PLA (both are set to 245°, because I'm printing PETG and it has a good stability on temperature). Thanks for the answer, it would be really interesting to find the reason for this error (if it is one). test.gcode

Cura 4.8 now has a profile I'm using it since this version of Cura, but I have a bug with it that I described in another thread (I don't know if it depends on the profile, but I never had it before (never is relative, got the printer 2 months...)) https://community.ultimaker.com/topic/35046-cura-48-and-sidewinder-inexplicable-temperature-jumps-and-misprints/

I have a problem, I find it interesting if other users have this too. I have misprints with Cura 4.8 and my Sidewinder. Above a certain height, which is always the same, the layers do not hold. After investigating various causes, I noticed that the temperature at this point is 210° instead of 245°. When I checked the gcode, I noticed the following lines in the gcode: M104 S190.0 T0 .... M104 S210.0 T0 What can cause this, I have looked at the settings and found nothing (even with the default settings the same problem occurs)? It would be interesting to see if other users have the same problem and where the error comes from. For the time being I will simply delete the lines in the gcode, which is sufficient for me. But it would be interesting to find out the cause anyway Many thanks and greetings