SMWE3

Hi Greg, The lid prints fine but I agree it is a poor design. The pin is small and to attach only with so few layers creates a real weak spot. I think you are right that increasing the wall thickness to eliminate the infill in the offset dowel is a good fit. Thanks, SMWE3

Hi fvrmr, Thanks, I will compare the project files. I am using the default CR-10 S Pro profile in Cura 4.8. It is probably related but I find that not only is the text gone the component is under sized. It is larger by ~0.35mm if sliced for an Ender 3 but printed on the CR-10 S. thanks, SMWE3

I am running across a similar problem. My text is a positive extrusion on the 10th layer. My layer height is 0.2mm and the text extrusion is 0.3mm. When I slice this for my Ender 3 the text comes out one layer thick as designed. When I slice this with for a CR-10 S PRO the text does not appear. Is there a default setting that might be different between the 2 printers? cam_lid_mp04.3mf