[Poor Quality with Ultimaker TPU Prints]

Printing Ultimaker Red TPU on my S5 Pro Bundle. The RFID chip was not recognized so I had to print it as "Generic TPU" but I believe I have used all of the settings of the Ultimaker TPU print profile. The infill doesn't seem to build on itself correctly. Part images and ufp attached. Appreciate any advice, thanks!

 

UMS5_supportonpart2.ufp

[Material Not Detected in Material Station: NOVAMID ID1030 CF10]

Thanks. That makes sense. I need to know how to load the material profile to the materials station.

[Material Not Detected in Material Station: NOVAMID ID1030 CF10]

Webpage says this material is compatible with the material station, but it is not detected. https://marketplace.ultimaker.com/app/cura/materials/DSM/NovamidID1030CF10

 

I have added the material profile to Cura successfully.

 

I have loaded the cc print core.

 

I'm not sure if this is related, but in Cura I also get the message "Extruder 1 is disabled because there is no material loaded. Please load a material or use customer configuration"

 

I have four materials in my materials station. Tough PLA Black (Ultimaker), PVA Natural (Ultimaker), Breakaway White (Ultimaker) <-- all of these are auto-detected by the material station. The roll of NOVAMID ID1030 CF10 is not auto-detected.

 

Thanks for any help.