kosh142

Hi all. needing some help. After having issues with print quiality i removed cura 4.8 and installed 4.13. but now print height is short. a part that is 20mm height in model and in cura but prints 1mm short. The X and Y measure 19.9mm which i expect Printer is ender pro v2. previous version i had installed printed exactly as expected, despite some outter shell quality problems. so before i wiped 4.8 off i backed up my profile and reintroduced it to 4.13, a couple of minor things i had to change back is all. now printing for a model that previously work perfectly is having size of parts issues. I thought it was top and bottom layers count..seems not. i thought it was printer setup (dimentions) not setup right, seems not. i have double checked the carriage and the bed bearrings (even replaced them all) yet still no cigar. I cannot believe that it is the printer itself as that has not changed only the version of cura. Are there aliens in 4.13 that i dont know about? Thanks in advance.

Hi all, i have been using cure for months now with many upgrade versons, currently with 4.8 it has been fine.. but over couple days it has now become very slow with saving files to either hard drive or the removeable drive, i have looked around for some kind of indication to what it could be, but nothing. pc has AMD quad core 3.8Ghz, ram 12Gb and 2Gb Nvivia graphics. i do well to keep the pc the best perdormance i can. cura behaviour is notmal with no menu lagg or any of that sort. it is onky slow while saving and can even state "Not responding" but if i leave it alone it will complete the save. model size does not matter its still the same. Any clues guys? thanks in advance.