LucasLomans
-
Posts
5 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by LucasLomans
-
-
-
Hi all,
I am currently printing this part on my Ultimaker 2+ with Ultimaker PLA and i get this weird under extrusion.
I am under the impression that there is something wrong with the filament. I have printed with other PLA's from Ultimaker and third parties with no problems. I have started printing this part with this filament before and the nozzle got completely clogged. When cleaning it with the atomic method I come across some leftover filament in the nozzle that I could not push through, even with the highest temperatures. After completely cleaning the printhead I started printing this part again. First it went well but soon after I am getting this result.
I have not made any changes to the default print settings.
Any ideas what could cause this problem?
Thanks,
Lucas
-
Thanks for your extensive reply gr5!
I have only tried printing with PLA and ABS. I liked that you can easily trim the printed parts with a knife with ABS. I will look into the other options you have mentioned.
I still have some spools of ABS left so I will give the other solutions you mentioned a try as well 😉
-
Hi everybody,
I am printing some parts with ABS and am encoutering some splitting. I guess I could use an enclosure for my Ultimaker 2+. I found the Ultimaker 2+ Connect Air Manager online. It seems though that it is marketed as a protection against toxic fumes. Does it also, however, keep the temperature around the build plate stable and warm, and does it protect the print against drafts?
Hope you all can give me some advice.
Lucas
Does the Ultimaker 2+ Connect Air Manager also keep the temperature around the build plate warm?
in UltiMaker 3D printers
Posted
Just ordered some... Can't wait to try it out!