Billy771
-
Posts
8 -
Joined
-
Last visited
Billy771's Achievements
0
Reputation
-
Hi guys, thank you for your ideas. For your better information here is asembly video
-
Hi Torgeir, Thank you very much for your effort, project files and changes in print settings. I will try some test prints accordance to your advice and also Greg and then I will choose final solution. Then I will inform you and Greg about the final result. Regards, Billy
-
Hi Greg, thank you very much for your support. Yes it is good solution. I thought about it but I am not enough experienced with settings. I was thinking also about of covering gap wing area with glasstextil strip with epoxy. I have bought the project of this glider with gcode files but for Prusa printer but I have Ender 3V2. I will try some test prints accordance to your advice and also Torgeir and then I will choose final solution.
-
-
Yes it is single wall print. I put left and right part of wing into project because there is the same problem. Thank you for your support639804002_Jokerwing-part-1-leftright-Billyed.01.3mf Joker wing-part-1-left, right - Billy ed.01.3mf
-
Yes it is single wall print. I put left and right part of wing into project because there is the same problem. Thank you for your support🙂 Joker wing-part-1-left, right - Billy ed.01.3mf
-
Please help me to correct problem of big gaps in some parts of skin of sliced glider wing (see attached screen shots). Real printed part has the same gaps. What print setting parameters to modify to correct the problem? Thanks for the answers
-
Part of wing shell is not 100% filled. What parameter to set fill gaps between lines?
