Jump to content

herzla

Member
  • Posts

    31
  • Joined

  • Last visited

Everything posted by herzla

  1. or isn't there a function to update UI within a long operation?
  2. i wrote a little plugin doing changes on the gcode as it sometimes needs several seconds I tried to show a progress-bar but UI is blocking - so I switched to a sub-thread to do the work but it's still the same if I don't wait for the thread to finish the progress-bar get's shown and runs smooth but I need to wait for the thread? or can I tell cura to wait for the thread to be finished? (~~ i don't know much about python ~~ but I did some research ~~) .. import threading from time import sleep .. class SamplePlugin(Extension): def __init__(self): ... self._application.getOutputDeviceManager().writeStarted.connect( self._processGCode ) ... def _processGCode(self, output_device): self._message = Message(catalog.i18nc("@info:progress", "processing gcode changes"), 0, False, -1) self._message.setTitle("Sample Plugin") self._message.show() x = threading.Thread(name="SamplePluginThread", target=self.threaded_processGcode, daemon=True) Logger.log("d", "start thread") x.start() *** how to wait without block*** ?? x.join() is blocking UI wait-loop is blocking UI also while x.is_alive(): sleep(0.1) *** how to wait without block*** ?? Logger.log("d", "fan control thread finished") #self._message.hide() #self._message = None def threaded_processGcode(self): ... for line in lines: if line.startswith(";LAYER:"): iLayerNr = int(re.split(':| |;|#|\n',line)[2]) if self._message: self._message.setProgress(iLine * 100 / len(newLines)) ...
  3. thanks, you created custom support for this screenshot? does it look the same when using tree-support? did you change other option also? I didn't got it looking like yours
  4. I created this little sample model to make testing faster (real model is similar but more complex and bigger and needs 20 minutes to slice) pls don't recommend to print it upside down πŸ˜‰ i was able to remove all transactions "inside the bowl" by using Combing Mode = all and disabling Z-Hop on retraction but when support is active there is one travel move through/over the model on each layer from support to the shell to be able to print this part with materials like TPU where stringing never ends I need to get rid of this travels another problem is that Z-Hop needs to be dissabled so this move goes over the already printed support and oftain touches it - I already needed to abort an PETG print because this travels broke the support 'avoid printed parts when traveling' is important to be checked 'avoid supports when traveling' does no change changing 'Z seam alignment' doesn't help also is there a way to let this travels go around "outside"? how can I enable Z-Hop again? model file: uBowl.3MF thanks πŸ™‚
  5. "Remove Empty First Layers" gehts hidden when support is active - seems like it gets disabled also in older Versions (until Beta2) but is hidden and active in 5.3 release when I disable support, than disable "Remove Empty First Layers" and then activate support again the GCode looks as espected and starts above the bed @GregValiant may you can check if this is same on your computer and may it was disabled?
  6. may you answer my question about the preview - otherwhise I can't help you as the model drops down every time and the bug is only on adaptive layers there is not much outside cura that will affect it the model dropping down in preview is a bug already and with adaptive layers it get's worse πŸ˜„ πŸ˜„ πŸ˜„ for sure, different language on OS and Cura πŸ˜„ πŸ˜„ πŸ˜„ I beleve, I was sure before, it workes fine in 5.3 Beta 2 and I just know it's possible to let models start "in the air" since yesterday so I don't think a lot people do that.. and even less with adaptive layers ~~ there have been a lot of (quite deep) changes from Beta 2 to release without public testing so I also still see tree-support growing through the model, brim errors and I see a lot more new and unsolved problems on github depending 5.3 "release" I got really sad when I saw the xmas-tree and don't know the reason why they needed to hurry on the release so may I just skip 5.3 and come back next year πŸ˜„ may this thread prevents others to crash the bed - github may show us the truth soon
  7. i opened the project on another windows 10 computer with fresh cura 5.3 installed Z ist starting at -1.19 when I use standard-profile the model get's dropped in preview but Z ist starging with positive value enabling adaptive layer (0.18+-0.8) makse the change - now also with absolute standard voron 2.4 profile Z is starting negative attaching a simple model producing same bug V350_MGN9_Assembly_Tool.3mf V350_MGN9_Assembly_Tool.gcode
  8. it never happened before and I can reproduce it in 5.3 release.. and I think most users place models to the plate.. i also disabled all post-process-scripts and also arc-welder - just in standard-profile I didn't get that error and will continue testing when you slice it - is the model dropped to the bed in preview or is support below? PRINT_START is a standard command in klipper - just in Cura there is no option for klipper firmware.. I attached the gcode so you see Z-value starts at -1.19 and continues "correct" (-1.09, -.99, -.89) negative_z_53.zip
  9. no, I'm not runninge Octoprint my Start-G-Code is corrent seems to be another Bug in 5.3 - it looked same on my computer until I resized the window - then the full code was visible only post-process is the standard 'Insert at Layer Change', and another script inserting layer-change information I can reproduce it any time when the Model starts 2mm above the bed with tree-support and support-roof active when the model starts on the print-bed everything is fine and working
  10. I added a little tube next to my model so something is touching the buildplate and now the print starts above the build plate but support-brim is missing /edit: it works again after I enabled skirt - before it was set to 'none' as I don't need print a skirt when support-brim is enabled this is how 1st layer looks in Cura 5.2:
  11. i was printing the whole day, since some hours in 5.3 release suddenly my printhead crashed the bed - after some searching I checked the gcode and the first move goes to Z-1.19 G92 E0 G1 F1800 E-0.5 ;LAYER_COUNT:396 ;LAYER:0 M107 G0 F6000 X206.319 Y233.911 Z-1.19 ;TYPE:SUPPORT G1 F720 E0 i don't have a z-offset plugin installed I also don'f find a setting to change Z-offset in Cura currently several instances of Cura are running, all base on same profile, seems like only one instance starts at negative Z byby PEI //edit: after some more testing it seems like Cura 5.3 has a Problem when the model starts in the air and needs to be support on full surface in Cura 5.2 it works fine bed_crash.3mf
  12. oh, i didn't see the answer.. MeshTools are installed and active already - body is not watertight is the only message but that may be fine as the model is open at the bottom Fast-Quadric-Mesh-Simplification is unable to load my STL - tried binary and ascii mode I can send you model and project, is there another way to upload as I don't like to publish the full model? since I needed to change support to 'everywhere' also a part of the model get's supported that should not get supported and the support-blocker get's ignored same model works fine in Cura 4.8 in both cases
  13. ~~z-hop (disabled) is the only difference~~
  14. i tried all combing modes but it just got worse travel "withing the model" would be the solution I think, yes I see serveal threads to this topic but all end up in stringing settings or stepper-current as it's not only the stringing I need to solve here it would be great to really find a way to change the travel-moves
  15. as you see in the first 2 screenshots my model is like a bowl and I have a lot of travels "inside" in the 3rd you may see there is one travel "along the model" and on layer-change there is one travel diagonal over the model 'avoid printed part when traveling' seems to have no effect and even when I change the Z-Seam-Alignment to shortest I have travels to the bowl (and also I can't use this option) suggestions? I'd like to print with TPU and that stuff just doesn't stop stringing..
  16. selbst wenn ich den Abstand reduziere Versucht Cura immer noch vom Boden weg zu stützen 😞 18cm hohe Stützstruktur um einen Zentimeter auszugleichen.. das würd ich gern vermeiden
  17. der dunkle Bereich ist der Blocker am Druckbett (10mm hoch und bei -5 startend)
  18. Cura 5.2 canceled slicing after about 2 hours logfile is full of 'Tried to add an item to batch without mesh' sometimes I also get an undifined error and saw the same in log-file, still trying to reproduce.. what does that mean? //edit: same model and settings work fine in Cura 4.1 2023-01-16 21:35:02,893 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:35:02.893] [warning] Mesh has overlapping faces! 2023-01-16 21:35:04,424 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:35:04.423] [info] Progress: start accomplished in 0s 2023-01-16 21:35:04,424 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:35:04.423] [info] Starting slice... 2023-01-16 21:35:04,425 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:35:04.423] [info] Slicing model... 2023-01-16 21:35:08,385 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:35:08.384] [info] Slice of mesh took 3.9689999999973224 seconds 2023-01-16 21:35:10,913 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:35:10.913] [info] Make polygons took 2.514999999999418 seconds 2023-01-16 21:35:11,105 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:35:11.104] [info] Progress: slice accomplished in 6.687999999994645s 2023-01-16 21:35:11,108 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:35:11.104] [info] Starting layerparts... 2023-01-16 21:35:12,144 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:35:12.144] [info] Progress: layerparts accomplished in 1.0310000000026776s 2023-01-16 21:35:12,146 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:35:12.144] [info] Starting inset+skin... 2023-01-16 21:35:30,852 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:35:30.852] [info] Layer count: 1898 2023-01-16 21:35:30,853 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:35:30.852] [info] Progress: inset+skin accomplished in 18.718999999997322s 2023-01-16 21:35:30,854 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:35:30.852] [info] Starting support... 2023-01-16 21:53:49,875 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:53:49.874] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:53:50,367 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:53:50.366] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:53:50,638 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:53:50.638] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:54:01,213 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:54:01.212] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:54:25,758 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:54:25.758] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:54:27,113 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:54:27.112] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:54:30,032 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:54:30.031] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:54:33,599 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:54:33.599] [warning] Can't create a transition when connecting two perimeters where the number of beads differs too much! 2 vs. 0 2023-01-16 21:54:33,600 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:54:33.599] [warning] Can't create a transition when connecting two perimeters where the number of beads differs too much! 0 vs. 2 2023-01-16 21:54:34,181 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:54:34.181] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:54:36,705 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:54:36.705] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:54:37,321 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:54:37.321] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:54:39,464 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:54:39.464] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:54:40,782 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:54:40.782] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:54:43,108 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:54:43.108] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:54:44,645 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:54:44.645] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:54:46,630 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:54:46.630] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:55:21,940 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:55:21.940] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:55:24,076 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:55:24.076] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:55:30,560 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:55:30.560] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:55:31,085 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:55:31.085] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:55:31,975 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:55:31.975] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:55:32,661 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:55:32.661] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:55:32,682 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:55:32.682] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:55:33,528 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:55:33.527] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:55:37,826 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:55:37.826] [info] Progress: support accomplished in 1206.9679999999935s 2023-01-16 21:55:37,827 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:55:37.826] [info] Starting export... 2023-01-16 21:55:39,884 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:55:39.883] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:55:45,052 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:55:45.052] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:55:57,407 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:55:57.406] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:55:59,475 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:55:59.475] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:01,245 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:01.245] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:04,550 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:04.549] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:04,897 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:04.896] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:05,494 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:05.493] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:06,128 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:06.127] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:06,232 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:06.231] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:06,322 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:06.321] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:07,307 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:07.306] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:10,841 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:10.840] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:13,392 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:13.392] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:13,517 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:13.516] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:15,123 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:15.122] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:15,537 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:15.537] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:16,775 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:16.774] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:17,033 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:17.032] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:17,754 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:17.754] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:17,785 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:17.784] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:18,138 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:18.138] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:18,790 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:18.789] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:19,976 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:19.975] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:21,448 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:21.447] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:21,464 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:21.464] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:21,702 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:21.701] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:22,062 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:22.061] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:22,514 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:22.513] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:41,629 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:41.628] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:41,983 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:41.982] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:43,046 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:43.046] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:45,036 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:45.035] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:45,169 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:45.168] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:45,443 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:45.442] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:45,920 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:45.919] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:45,936 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:45.935] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:46,003 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:46.002] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:46,184 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:46.183] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:46,232 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:46.217] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:46,259 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:46.258] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:49,517 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:49.517] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:57,497 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:57.497] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:57,901 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:57.901] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:56:57,938 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:56:57.937] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:57:00,077 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:57:00.077] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:57:00,621 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:57:00.620] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:57:00,631 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:57:00.630] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:57:00,690 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:57:00.690] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:57:00,761 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:57:00.760] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:57:02,085 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:57:02.085] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:57:02,090 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:57:02.089] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:57:02,097 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:57:02.097] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:57:02,110 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:57:02.109] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:57:02,111 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:57:02.110] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:57:02,112 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:57:02.111] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:57:02,124 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:57:02.124] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:57:02,132 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:57:02.131] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:57:02,140 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:57:02.140] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:57:02,141 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:57:02.140] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:57:02,154 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:57:02.154] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:57:02,164 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 21:57:02.164] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 21:58:37,260 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.03194713592529297 seconds 2023-01-16 22:02:22,331 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:02:22.331] [info] Progress: export accomplished in 404.5s 2023-01-16 22:02:23,187 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:02:23.186] [info] Sending 1898 layers. 2023-01-16 22:02:23,188 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:02:23.188] [info] Total time elapsed 1638.7659999999887s. 2023-01-16 22:02:23,189 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] 2023-01-16 22:02:23,190 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:02:23.188] [info] Print time (s): 187357 2023-01-16 22:02:23,191 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:02:23.188] [info] Print time (hr|min|s): 52h 2m 37s 2023-01-16 22:02:23,192 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:02:23.188] [info] Filament (mm^3): 402378 2023-01-16 22:02:23,466 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:02:23.466] [info] Closing connection. 2023-01-16 22:02:23,967 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] 2023-01-16 22:02:24,001 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] Cura_SteamEngine version 5.2.1 2023-01-16 22:02:24,029 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] Copyright (C) 2022 Ultimaker 2023-01-16 22:02:24,057 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] 2023-01-16 22:02:24,085 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] This program is free software: you can redistribute it and/or modify 2023-01-16 22:02:24,117 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] it under the terms of the GNU Affero General Public License as published by 2023-01-16 22:02:24,151 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] the Free Software Foundation, either version 3 of the License, or 2023-01-16 22:02:24,179 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] (at your option) any later version. 2023-01-16 22:02:24,180 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [770]: Slicing took 1646.649371623993 seconds 2023-01-16 22:02:24,180 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] 2023-01-16 22:02:24,181 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [771]: Number of models per buildplate: {0: 1} 2023-01-16 22:02:24,182 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] This program is distributed in the hope that it will be useful, 2023-01-16 22:02:24,183 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [785]: See if there is more to slice... 2023-01-16 22:02:24,183 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of 2023-01-16 22:02:24,184 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 2023-01-16 22:02:24,185 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] GNU Affero General Public License for more details. 2023-01-16 22:02:24,186 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] 2023-01-16 22:02:24,186 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] You should have received a copy of the GNU Affero General Public License 2023-01-16 22:02:24,187 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] along with this program. If not, see <http://www.gnu.org/licenses/>. 2023-01-16 22:02:24,199 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [200]: Socket state changed to Closing 2023-01-16 22:02:24,200 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [224]: Socket debug: Arcus Error (13): Closing socket because other side requested close. 2023-01-16 22:02:24,201 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [202]: Socket state changed to Closed 2023-01-16 22:02:24,202 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [969]: Backend finished slicing. Resetting process and socket. 2023-01-16 22:02:27,325 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PreviewStage 2023-01-16 22:02:27,326 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SimulationView 2023-01-16 22:02:27,330 - DEBUG - [MainThread] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.0004990100860595703 seconds 2023-01-16 22:02:27,332 - DEBUG - [MainThread] STLReader.STLReader._read [68]: Loaded a mesh with 12612 vertices 2023-01-16 22:02:27,334 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\plugins\SimulationView\simulationview_composite.shader]... 2023-01-16 22:02:27,405 - DEBUG - [JobQueueWorker [4]] CuraEngineBackend.ProcessSlicedLayersJob.run [74]: Processing new layer for build plate 0... 2023-01-16 22:02:27,561 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\color.shader]... 2023-01-16 22:02:27,567 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\plugins\SimulationView\layers3d.shader]... 2023-01-16 22:02:27,573 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\plugins\SimulationView\layers3d_shadow.shader]... 2023-01-16 22:02:27,578 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\toolhandle.shader]... 2023-01-16 22:02:27,581 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\color.shader]... 2023-01-16 22:02:27,584 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\striped.shader]... 2023-01-16 22:02:33,028 - DEBUG - [JobQueueWorker [4]] CuraEngineBackend.ProcessSlicedLayersJob.run [254]: Processing layers took 5.621908903121948 seconds 2023-01-16 22:02:35,188 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onProcessLayersFinished [1006]: See if there is more to slice(2)... 2023-01-16 22:18:17,669 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PrepareStage 2023-01-16 22:18:17,671 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SolidView 2023-01-16 22:18:21,853 - INFO - [MainThread] UM.Controller.deleteAllNodesWithMeshData [468]: Clearing scene 2023-01-16 22:18:21,972 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=1) <UM.Operations.RemoveSceneNodeOperation.RemoveSceneNodeOperation object at 0x000001C2D8D85E70>, took 21ms 2023-01-16 22:18:21,975 - INFO - [MainThread] cura.CuraApplication._removeNodesWithLayerData [2046]: Clearing scene 2023-01-16 22:18:22,537 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/ObjectSelector.qml:134:17: Unable to assign [undefined] to int 2023-01-16 22:18:22,539 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/ObjectSelector.qml:132:17: Unable to assign [undefined] to int 2023-01-16 22:18:22,540 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/ObjectSelector.qml:131:17: Unable to assign [undefined] to bool 2023-01-16 22:18:22,541 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/ObjectSelector.qml:133:17: Unable to assign [undefined] to QString 2023-01-16 22:18:22,849 - WARNING - [MainThread] cura.UI.PrintInformation.setBaseName [371]: Unsupported Mime Type Database file extension 2023-01-16 22:23:57,743 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getColor [120]: No color primary_text_hover defined in Theme 2023-01-16 22:23:57,861 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [145]: No auth data to retrieve the access_token from 2023-01-16 22:23:57,862 - DEBUG - [MainThread] cura.UltimakerCloud.UltimakerCloudScope.requestHook [30]: User is not logged in for Cloud API request to https://api.ultimaker.com/cura-packages/v1/cura/v8.2.0/packages?limit=20&package_type=plugin 2023-01-16 22:24:03,433 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [145]: No auth data to retrieve the access_token from 2023-01-16 22:24:03,434 - DEBUG - [MainThread] cura.UltimakerCloud.UltimakerCloudScope.requestHook [30]: User is not logged in for Cloud API request to https://api.ultimaker.com/cura-packages/v1/cura/v8.2.0/packages?limit=20&package_type=material 2023-01-16 22:24:06,250 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.019967079162597656 seconds 2023-01-16 22:24:06,883 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [145]: No auth data to retrieve the access_token from 2023-01-16 22:24:06,883 - DEBUG - [MainThread] cura.UltimakerCloud.UltimakerCloudScope.requestHook [30]: User is not logged in for Cloud API request to https://api.ultimaker.com/cura-packages/v1/cura/v8.2.0/packages/package-updates?installed_packages=OBJWriter:1.0.1&installed_packages=VersionUpgrade32to33:1.0.1&installed_packages=STLReader:1.0.1&installed_packages=RotateTool:1.0.1&installed_packages=UFPReader:1.0.0&installed_packages=VersionUpgrade30to31:1.0.1&installed_packages=ThingiBrowser:2.2.1&installed_packages=AMFReader:1.0.0&installed_packages=GCodeWriter:1.0.1&installed_packages=RemovableDriveOutputDevice:1.0.1&installed_packages=USBPrinting:1.0.2&installed_packages=VersionUpgrade22to24:1.0.1&installed_packages=VersionUpgrade41to42:1.0.0&installed_packages=VersionUpgrade34to35:1.0.1&installed_packages=VersionUpgrade26to27:1.0.1&installed_packages=LegacyProfileReader:1.0.1&installed_packages=SimpleView:1.0.1&installed_packages=SolidView:1.0.1&installed_packages=SelectionTool:1.0.1&installed_packages=VersionUpgrade45to46:1.0.0&installed_packages=PostProcessingPlugin:2.2.1&installed_packages=VersionUpgrade27to30:1.0.1&installed_packages=OBJReader:1.0.1&installed_packages=CustomSupportCylinder:2.6.6&installed_packages=3MFReader:1.0.1&installed_packages=VersionUpgrade40to41:1.0.1&installed_packages=VersionUpgrade47to48:1.0.0&installed_packages=CuraProfileReader:1.0.1&installed_packages=VersionUpgrade44to45:1.0.0&installed_packages=VersionUpgrade460to462:1.0.0&installed_packages=ScaleTool:1.0.1&installed_packages=GCodeProfileReader:1.0.1&installed_packages=MachineSettingsAction:1.0.1&installed_packages=VersionUpgrade42to43:1.0.0&installed_packages=SupportEraser:1.0.1&installed_packages=STLWriter:1.0.1&installed_packages=XRayView:1.0.1&installed_packages=GCodeGzReader:1.0.1&installed_packages=3MFWriter:1.0.1&installed_packages=SimulationView:1.0.1&installed_packages=CameraTool:1.0.1&installed_packages=UFPWriter:1.0.1&installed_packages=CalibrationShapes:2.1.5&installed_packages=VersionUpgrade35to40:1.0.0&installed_packages=PrepareStage:1.0.1&installed_packages=VersionUpgrade411to412:1.0.0&installed_packages=LocalFileOutputDevice:1.0.1&installed_packages=MirrorTool:1.0.1&installed_packages=XMLMaterialProfile:1.0.1&installed_packages=TranslateTool:1.0.1&installed_packages=StartOptimiser:3.6.0&installed_packages=GCodeGzWriter:1.0.1&installed_packages=SidebarGUIPlugin:4.5.0&installed_packages=CuraDrive:1.2.0&installed_packages=FirmwareUpdater:1.0.1&installed_packages=VersionUpgrade33to34:1.0.1&installed_packages=VersionUpgrade49to410:1.0.0&installed_packages=SliceInfoPlugin:1.0.1&installed_packages=FileLogger:1.0.1&installed_packages=X3DReader:1.0.1&installed_packages=Marketplace:1.0.0&installed_packages=UpdateChecker:1.0.1&installed_packages=ConsoleLogger:1.0.1&installed_packages=CuraEngineBackend:1.0.1&installed_packages=VersionUpgrade462to47:1.0.0&installed_packages=VersionUpgrade48to49:1.0.0&installed_packages=SentryLogger:1.0.0&installed_packages=ModelChecker:1.0.1&installed_packages=GCodeReader:1.0.1&installed_packages=ImageReader:1.0.1&installed_packages=UM3NetworkPrinting:1.0.1&installed_packages=ArcWelderPlugin:3.5.2&installed_packages=TrimeshReader:1.0.0&installed_packages=PerObjectSettingsTool:1.0.1&installed_packages=FirmwareUpdateChecker:1.0.1&installed_packages=DigitalLibrary:1.1.0&installed_packages=GcodeFilenameFormatPlus:1.0.0&installed_packages=VersionUpgrade21to22:1.0.1&installed_packages=PreviewStage:1.0.1&installed_packages=CuraProfileWriter:1.0.1&installed_packages=PrinterSettingsPlugin:3.5.4&installed_packages=MoonrakerConnection:1.6.5&installed_packages=VersionUpgrade25to26:1.0.1&installed_packages=UltimakerMachineActions:1.0.1&installed_packages=VersionUpgrade43to44:1.0.0&installed_packages=MonitorStage:1.0.1&installed_packages=LocalContainerProvider:1.0.1&installed_packages=GenericCFFPA:1.4.0&installed_packages=UltimakerNylon:1.4.0&installed_packages=UltimakerPLA:1.4.0&installed_packages=GenericPETG:1.4.0&installed_packages=GenericNylon:1.4.0&installed_packages=PolyPlusPLA:1.0.1&installed_packages=PolyWoodPLA:1.0.1&installed_packages=GenericCPE:1.4.0&installed_packages=PolyMaxPLA:1.0.1&installed_packages=FABtotumABS:1.4.0&installed_packages=GenericABS:1.4.0&installed_packages=GenericPC:1.4.0&installed_packages=Filo3DPLA:1.0.1&installed_packages=VertexDeltaPLA:1.4.0&installed_packages=GenericToughPLA:1.4.0&installed_packages=OctofiberPLA:1.0.1&installed_packages=UltimakerTPLA:1.4.0&installed_packages=PolyFlexPLA:1.0.1&installed_packages=GenericCPEPlus:1.4.0&installed_packages=GenericGFFPA:1.4.0&installed_packages=FABtotumTPU:1.4.0&installed_packages=UltimakerCPE:1.4.0&installed_packages=UltimakerBAM:1.4.0&installed_packages=IMADE3DJellyBOXPETG:1.0.1&installed_packages=UltimakerPVA:1.4.0&installed_packages=GenericTPU:1.4.0&installed_packages=FiberlogyHDPLA:1.0.1&installed_packages=UltimakerCPEP:1.4.0&installed_packages=UltimakerPC:1.4.0&installed_packages=UltimakerTPU:1.4.0&installed_packages=GenericBAM:1.4.0&installed_packages=UltimakerPP:1.4.0&installed_packages=VertexDeltaABS:1.4.0&installed_packages=GenericPVA:1.4.0&installed_packages=GenericPP:1.4.0&installed_packages=GenericPLA:1.4.0&installed_packages=GenericCFFCPE:1.4.0&installed_packages=VertexDeltaPET:1.4.0&installed_packages=DagomaChromatikPLA:1.0.1&installed_packages=FABtotumPLA:1.4.0&installed_packages=IMADE3DJellyBOXPLA:1.0.1&installed_packages=UltimakerABS:1.4.0&installed_packages=GenericHIPS:1.4.0&installed_packages=VertexDeltaTPU:1.4.0&installed_packages=GenericGFFCPE:1.4.0&installed_packages=FABtotumNylon:1.4.0 2023-01-16 22:24:19,750 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [145]: No auth data to retrieve the access_token from 2023-01-16 22:24:19,751 - DEBUG - [MainThread] cura.UltimakerCloud.UltimakerCloudScope.requestHook [30]: User is not logged in for Cloud API request to https://api.ultimaker.com/cura-packages/v1/cura/v8.2.0/packages?limit=20&package_type=plugin&page=2 2023-01-16 22:24:21,847 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [145]: No auth data to retrieve the access_token from 2023-01-16 22:24:21,848 - DEBUG - [MainThread] cura.UltimakerCloud.UltimakerCloudScope.requestHook [30]: User is not logged in for Cloud API request to https://api.ultimaker.com/cura-packages/v1/cura/v8.2.0/packages?limit=20&package_type=plugin&search=m 2023-01-16 22:24:22,491 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [145]: No auth data to retrieve the access_token from 2023-01-16 22:24:22,493 - DEBUG - [MainThread] cura.UltimakerCloud.UltimakerCloudScope.requestHook [30]: User is not logged in for Cloud API request to https://api.ultimaker.com/cura-packages/v1/cura/v8.2.0/packages?limit=20&package_type=plugin&search=mesh 2023-01-16 22:24:42,987 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.04003405570983887 seconds 2023-01-16 22:25:53,390 - INFO - [MainThread] cura.CuraApplication.readLocalFile [1774]: Attempting to read file file:///D:/Projects/SolidWorks/separator_x3/SeparateV8_33cm_blocker.3MF 2023-01-16 22:25:55,130 - DEBUG - [JobQueueWorker [5]] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.0 seconds 2023-01-16 22:25:55,139 - DEBUG - [JobQueueWorker [5]] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.0004992485046386719 seconds 2023-01-16 22:25:55,579 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [164]: New error check scheduled. 2023-01-16 22:25:55,659 - DEBUG - [JobQueueWorker [5]] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.18020868301391602 seconds 2023-01-16 22:25:55,711 - WARNING - [JobQueueWorker [5]] UM.Scene.SceneNode.addDecorator [234]: Unable to add the same decorator type (<class 'cura.Scene.SliceableObjectDecorator.SliceableObjectDecorator'>) to a SceneNode twice. 2023-01-16 22:25:55,722 - DEBUG - [JobQueueWorker [5]] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.0 seconds 2023-01-16 22:25:55,734 - DEBUG - [JobQueueWorker [5]] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.002995729446411133 seconds 2023-01-16 22:25:55,759 - DEBUG - [JobQueueWorker [5]] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.0004990100860595703 seconds 2023-01-16 22:25:56,835 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel. 2023-01-16 22:25:56,837 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel. 2023-01-16 22:25:56,841 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel. 2023-01-16 22:25:57,147 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [33]: Updating CustomQualityProfilesDropDownMenuModel. 2023-01-16 22:25:58,037 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel. 2023-01-16 22:25:58,038 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel. 2023-01-16 22:25:58,042 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel. 2023-01-16 22:25:58,132 - DEBUG - [JobQueueWorker [5]] UM.Mesh.MeshData.approximateConvexHull [505]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 2.3227431774139404 seconds. 24959 input vertices. 24959 output vertices. 2023-01-16 22:25:58,283 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._checkStack [168]: Need to check for errors again. Discard the current progress and reschedule a check. 2023-01-16 22:25:58,379 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [33]: Updating CustomQualityProfilesDropDownMenuModel. 2023-01-16 22:25:58,406 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [164]: New error check scheduled. 2023-01-16 22:25:58,893 - DEBUG - [JobQueueWorker [5]] UM.FileHandler.ReadFileJob.run [83]: Loading file took 5.5 seconds 2023-01-16 22:25:59,746 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [221]: Error check finished, result = False, time = 1.34s 2023-01-16 22:26:01,125 - DEBUG - [JobQueueWorker [5]] UM.Mesh.MeshData.approximateConvexHull [505]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 2.2308921813964844 seconds. 24946 input vertices. 24946 output vertices. 2023-01-16 22:26:01,208 - DEBUG - [JobQueueWorker [5]] UM.Mesh.MeshData.approximateConvexHull [505]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.07787561416625977 seconds. 835 input vertices. 835 output vertices. 2023-01-16 22:26:01,265 - DEBUG - [JobQueueWorker [5]] UM.Mesh.MeshData.approximateConvexHull [505]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.05590987205505371 seconds. 720 input vertices. 720 output vertices. 2023-01-16 22:26:01,523 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x000001C2972EF010>, took 246ms 2023-01-16 22:26:01,602 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=0), took 0ms 2023-01-16 22:26:06,979 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: TranslateOp.(node=<CuraSceneNode object: 'SeparateV8_33cm_blocker.3MF'>,trans.=<199.229,1.000,174.000>), took 207ms 2023-01-16 22:26:08,337 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: TranslateOp.(node=<CuraSceneNode object: 'SeparateV8_33cm_blocker.3MF'>,trans.=<199.229,1.000,-616.943>), took 244ms 2023-01-16 22:26:10,227 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: TranslateOp.(node=<CuraSceneNode object: 'SeparateV8_33cm_blocker.3MF'>,trans.=<199.229,-70.302,-616.943>), took 206ms 2023-01-16 22:26:12,074 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.04246211051940918 seconds 2023-01-16 22:26:13,610 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=2) SetParentOperation(node = <CuraSceneNode object: 'body131471'>, parent_node=<SceneNode object: 'Root'>) SetParentOperation(node = <CuraSceneNode object: 'Blocker Top Border^SeparateV8_33cm_blocker(Standard)Anzeigestatus 1'>, parent_node=<SceneNode object: 'Root'>), took 481ms 2023-01-16 22:26:25,103 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=2) SetParentOperation(node = <CuraSceneNode object: 'body259049'>, parent_node=<SceneNode object: 'Root'>) SetParentOperation(node = <CuraSceneNode object: 'body315035'>, parent_node=<SceneNode object: 'Root'>), took 283ms 2023-01-16 22:26:31,697 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:26:32,516 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:26:32,538 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:26:32,555 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:26:32,568 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:26:32,581 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:26:32,595 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:26:32,607 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:26:32,619 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:26:32,632 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:26:32,648 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh .... 2023-01-16 22:26:38,896 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:26:39,194 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:26:41,846 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.012480020523071289 seconds 2023-01-16 22:30:15,381 - INFO - [MainThread] cura.CuraApplication.reloadAll [1471]: Reloading all loaded mesh data. 2023-01-16 22:30:15,382 - WARNING - [MainThread] cura.CuraApplication.reloadAll [1507]: Unable to reload data because we don't have a filename. 2023-01-16 22:30:15,383 - WARNING - [MainThread] cura.CuraApplication.reloadAll [1507]: Unable to reload data because we don't have a filename. 2023-01-16 22:30:15,384 - WARNING - [MainThread] cura.CuraApplication.reloadAll [1507]: Unable to reload data because we don't have a filename. 2023-01-16 22:30:17,346 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:30:20,574 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Users/me/AppData/Roaming/cura/5.2/plugins/SidebarGUIPlugin/SidebarGUIPlugin/resources/qml/ProfileSelector51.qml:135: ReferenceError: intent is not defined 2023-01-16 22:30:21,631 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:30:22,721 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh ... 2023-01-16 22:30:26,478 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:30:26,900 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:30:27,224 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:30:29,523 - INFO - [MainThread] UM.Controller.deleteAllNodesWithMeshData [468]: Clearing scene 2023-01-16 22:30:29,744 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=3) <UM.Operations.RemoveSceneNodeOperation.RemoveSceneNodeOperation object at 0x000001C2DCC74E80> <UM.Operations.RemoveSceneNodeOperation.RemoveSceneNodeOperation object at 0x000001C2972CE1D0> <UM.Operations.RemoveSceneNodeOperation.RemoveSceneNodeOperation object at 0x000001C2972CF010>, took 89ms 2023-01-16 22:30:29,746 - INFO - [MainThread] cura.CuraApplication._removeNodesWithLayerData [2046]: Clearing scene 2023-01-16 22:30:29,751 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:30:29,860 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:30:30,233 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/ObjectSelector.qml:134:17: Unable to assign [undefined] to int 2023-01-16 22:30:30,235 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/ObjectSelector.qml:132:17: Unable to assign [undefined] to int 2023-01-16 22:30:30,237 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/ObjectSelector.qml:131:17: Unable to assign [undefined] to bool 2023-01-16 22:30:30,239 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/ObjectSelector.qml:133:17: Unable to assign [undefined] to QString 2023-01-16 22:30:30,242 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/ObjectSelector.qml:134:17: Unable to assign [undefined] to int 2023-01-16 22:30:30,244 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/ObjectSelector.qml:132:17: Unable to assign [undefined] to int 2023-01-16 22:30:30,246 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/ObjectSelector.qml:131:17: Unable to assign [undefined] to bool 2023-01-16 22:30:30,247 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/ObjectSelector.qml:133:17: Unable to assign [undefined] to QString 2023-01-16 22:30:30,249 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/ObjectSelector.qml:134:17: Unable to assign [undefined] to int 2023-01-16 22:30:30,251 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/ObjectSelector.qml:132:17: Unable to assign [undefined] to int 2023-01-16 22:30:30,253 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/ObjectSelector.qml:131:17: Unable to assign [undefined] to bool 2023-01-16 22:30:30,255 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/ObjectSelector.qml:133:17: Unable to assign [undefined] to QString 2023-01-16 22:30:30,527 - WARNING - [MainThread] cura.UI.PrintInformation.setBaseName [371]: Unsupported Mime Type Database file extension 2023-01-16 22:30:31,689 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.03457236289978027 seconds 2023-01-16 22:30:33,055 - INFO - [MainThread] cura.CuraApplication.readLocalFile [1774]: Attempting to read file file:///D:/Projects/SolidWorks/separator_x3/SeparateV8_33cm_blocker.3MF 2023-01-16 22:30:34,945 - DEBUG - [JobQueueWorker [6]] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.0 seconds 2023-01-16 22:30:34,960 - DEBUG - [JobQueueWorker [6]] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.0004992485046386719 seconds 2023-01-16 22:30:35,477 - DEBUG - [JobQueueWorker [6]] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.1667311191558838 seconds 2023-01-16 22:30:35,527 - WARNING - [JobQueueWorker [6]] UM.Scene.SceneNode.addDecorator [234]: Unable to add the same decorator type (<class 'cura.Scene.SliceableObjectDecorator.SliceableObjectDecorator'>) to a SceneNode twice. 2023-01-16 22:30:35,532 - DEBUG - [JobQueueWorker [6]] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.0 seconds 2023-01-16 22:30:35,537 - DEBUG - [JobQueueWorker [6]] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.0009989738464355469 seconds 2023-01-16 22:30:35,542 - DEBUG - [JobQueueWorker [6]] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.0004992485046386719 seconds 2023-01-16 22:30:36,118 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [164]: New error check scheduled. 2023-01-16 22:30:36,672 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel. 2023-01-16 22:30:36,673 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel. 2023-01-16 22:30:36,677 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel. 2023-01-16 22:30:36,952 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._checkStack [168]: Need to check for errors again. Discard the current progress and reschedule a check. 2023-01-16 22:30:36,999 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [33]: Updating CustomQualityProfilesDropDownMenuModel. 2023-01-16 22:30:37,841 - DEBUG - [JobQueueWorker [6]] UM.Mesh.MeshData.approximateConvexHull [505]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 2.284806251525879 seconds. 24959 input vertices. 24959 output vertices. 2023-01-16 22:30:37,933 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [164]: New error check scheduled. 2023-01-16 22:30:38,568 - DEBUG - [JobQueueWorker [6]] UM.FileHandler.ReadFileJob.run [83]: Loading file took 5.5 seconds 2023-01-16 22:30:38,598 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel. 2023-01-16 22:30:38,601 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel. 2023-01-16 22:30:38,605 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel. 2023-01-16 22:30:38,895 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [33]: Updating CustomQualityProfilesDropDownMenuModel. 2023-01-16 22:30:39,529 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [221]: Error check finished, result = False, time = 1.60s 2023-01-16 22:30:40,823 - DEBUG - [JobQueueWorker [6]] UM.Mesh.MeshData.approximateConvexHull [505]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 2.2533557415008545 seconds. 24946 input vertices. 24946 output vertices. 2023-01-16 22:30:40,913 - DEBUG - [JobQueueWorker [6]] UM.Mesh.MeshData.approximateConvexHull [505]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.08436346054077148 seconds. 835 input vertices. 835 output vertices. 2023-01-16 22:30:40,945 - DEBUG - [JobQueueWorker [6]] UM.Mesh.MeshData.approximateConvexHull [505]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.02945256233215332 seconds. 448 input vertices. 448 output vertices. 2023-01-16 22:30:41,241 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x000001C2F3D01E10>, took 283ms 2023-01-16 22:30:41,345 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:230:25: Unable to assign [undefined] to qulonglong 2023-01-16 22:30:41,365 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=0), took 0ms 2023-01-16 22:30:47,014 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.048918724060058594 seconds 2023-01-16 22:30:48,238 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: TranslateOp.(node=<CuraSceneNode object: 'SeparateV8_33cm_blocker.3MF'>,trans.=<199.229,1.000,174.000>), took 217ms 2023-01-16 22:30:49,449 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: TranslateOp.(node=<CuraSceneNode object: 'SeparateV8_33cm_blocker.3MF'>,trans.=<199.229,1.000,-616.943>), took 218ms 2023-01-16 22:30:51,146 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: TranslateOp.(node=<CuraSceneNode object: 'SeparateV8_33cm_blocker.3MF'>,trans.=<199.229,-70.302,-616.943>), took 221ms 2023-01-16 22:30:55,373 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=2) SetParentOperation(node = <CuraSceneNode object: 'body131471'>, parent_node=<SceneNode object: 'Root'>) SetParentOperation(node = <CuraSceneNode object: 'Blocker Top Border^SeparateV8_33cm_blocker(Standard)Anzeigestatus 1'>, parent_node=<SceneNode object: 'Root'>), took 526ms 2023-01-16 22:30:58,105 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=2) SetParentOperation(node = <CuraSceneNode object: 'body259049'>, parent_node=<SceneNode object: 'Root'>) SetParentOperation(node = <CuraSceneNode object: 'body386024'>, parent_node=<SceneNode object: 'Root'>), took 304ms 2023-01-16 22:31:02,094 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:31:03,285 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:31:03,592 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:31:04,587 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh ... 2023-01-16 22:31:19,852 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:31:19,853 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:31:19,885 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:31:19,885 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:31:20,598 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend._createSnapshot [275]: Creating thumbnail image (just before slice)... 2023-01-16 22:31:20,601 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [252]: Changing perspective mode to orthographic. 2023-01-16 22:31:20,608 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\overhang.shader]... 2023-01-16 22:31:20,612 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\transparent_object.shader]... 2023-01-16 22:31:20,615 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\striped.shader]... 2023-01-16 22:31:20,791 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [290]: Starting to slice... 2023-01-16 22:31:20,792 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [309]: Going to slice build plate [0]! 2023-01-16 22:31:20,845 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [235]: Previous socket existed. Closing that first. 2023-01-16 22:31:21,146 - WARNING - [JobQueueWorker [7]] CuraEngineBackend.StartSliceJob.get_value [85]: Unable to replace 'filament_weight' placeholder in start/end g-code 2023-01-16 22:31:21,150 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:31:21,151 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:31:21,156 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [192]: Socket state changed to Listening 2023-01-16 22:31:21,162 - INFO - [MainThread] UM.Backend.Backend.startEngine [95]: Started engine process: C:\Program Files\Ultimaker Cura 5.2.1\CuraEngine.exe 2023-01-16 22:31:21,164 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [115]: [Backend] Calling engine with: ['C:\\Program Files\\Ultimaker Cura 5.2.1\\CuraEngine.exe', 'connect', '127.0.0.1:49674', ''] 2023-01-16 22:31:21,238 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:31:21.214] [info] Connecting to 127.0.0.1:49674 2023-01-16 22:31:21,272 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [196]: Socket state changed to Connected 2023-01-16 22:31:21,292 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [185]: Backend connected on port 49674 2023-01-16 22:31:21,531 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [516]: Sending slice message took 0.7383062839508057 seconds 2023-01-16 22:31:23,099 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:31:23.099] [warning] Mesh has overlapping faces! 2023-01-16 22:31:23,788 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:31:23.787] [info] Progress: start accomplished in 0s 2023-01-16 22:31:23,790 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:31:23.787] [info] Starting slice... 2023-01-16 22:31:23,792 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:31:23.787] [info] Slicing model... 2023-01-16 22:31:25,013 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:31:25.012] [info] Slice of mesh took 1.235000000000582 seconds 2023-01-16 22:31:25,676 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:31:25.676] [info] Make polygons took 0.6560000000026776 seconds 2023-01-16 22:31:25,745 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:31:25.745] [info] Slice of mesh took 0.07799999999406282 seconds 2023-01-16 22:31:25,772 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:31:25.772] [info] Make polygons took 0.01600000000325963 seconds 2023-01-16 22:31:25,777 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:31:25.777] [info] Slice of mesh took 0.014999999999417923 seconds 2023-01-16 22:31:25,784 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:31:25.784] [info] Make polygons took 0 seconds 2023-01-16 22:31:25,814 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:31:25.814] [info] Progress: slice accomplished in 2.0319999999919673s 2023-01-16 22:31:25,815 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:31:25.814] [info] Starting layerparts... 2023-01-16 22:31:28,478 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:31:28.477] [info] Progress: layerparts accomplished in 2.672000000005937s 2023-01-16 22:31:28,479 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:31:28.477] [info] Starting inset+skin... 2023-01-16 22:31:33,145 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:31:33,146 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:31:33,297 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:31:33,299 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh ... 2023-01-16 22:31:39,698 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:31:39,700 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:31:46,822 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:31:46.822] [info] Layer count: 1898 2023-01-16 22:31:46,823 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:31:46.822] [info] Progress: inset+skin accomplished in 18.34299999999348s 2023-01-16 22:31:46,823 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:31:46.822] [info] Starting support... 2023-01-16 22:41:40,696 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:41:40,696 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh ... 2023-01-16 22:47:31,417 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:31,421 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:47:31.421] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 22:47:31,434 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh ... 2023-01-16 22:47:31,575 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:31,617 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-16 22:47:31.616] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints. 2023-01-16 22:47:31,626 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:31,627 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh ... 2023-01-16 22:47:41,956 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:41,957 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:43,197 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:230:25: Unable to assign [undefined] to qulonglong 2023-01-16 22:47:43,222 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:43,223 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:44,102 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:44,103 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:44,128 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:44,129 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:44,497 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:44,498 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,152 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-0.002,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-0.002,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-0.002,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-0.002,0.000>), took 21ms 2023-01-16 22:47:45,157 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,158 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,187 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-0.002,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-0.002,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-0.002,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-0.002,0.000>), took 18ms 2023-01-16 22:47:45,190 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,191 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,222 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-0.837,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-0.837,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-0.837,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-0.837,0.000>), took 21ms 2023-01-16 22:47:45,226 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,227 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,255 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-1.950,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-1.950,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-1.950,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-1.950,0.000>), took 16ms 2023-01-16 22:47:45,258 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,259 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,299 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-2.786,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-2.786,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-2.786,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-2.786,0.000>), took 27ms 2023-01-16 22:47:45,303 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,304 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,334 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-3.622,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-3.622,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-3.622,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-3.622,0.000>), took 20ms 2023-01-16 22:47:45,337 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,338 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,367 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-5.011,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-5.011,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-5.011,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-5.011,0.000>), took 19ms 2023-01-16 22:47:45,371 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,371 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,405 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-4.172,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-4.172,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-4.172,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-4.172,0.000>), took 23ms 2023-01-16 22:47:45,412 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,414 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,448 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-3.895,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-3.895,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-3.895,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-3.895,0.000>), took 23ms 2023-01-16 22:47:45,451 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,452 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,482 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-4.449,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-4.449,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-4.449,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-4.449,0.000>), took 20ms 2023-01-16 22:47:45,486 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,486 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,518 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-2.222,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-2.222,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-2.222,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-2.222,0.000>), took 23ms 2023-01-16 22:47:45,525 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,527 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,557 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-1.949,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-1.949,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-1.949,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-1.949,0.000>), took 21ms 2023-01-16 22:47:45,577 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-0.557,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-0.557,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-0.557,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-0.557,0.000>), took 17ms 2023-01-16 22:47:45,580 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,581 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,610 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-5.850,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-5.850,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-5.850,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-5.850,0.000>), took 20ms 2023-01-16 22:47:45,614 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,615 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,646 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-4.179,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-4.179,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-4.179,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-4.179,0.000>), took 22ms 2023-01-16 22:47:45,650 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,651 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,683 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-3.900,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-3.900,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-3.900,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-3.900,0.000>), took 21ms 2023-01-16 22:47:45,686 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,687 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,716 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-5.015,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-5.015,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-5.015,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-5.015,0.000>), took 19ms 2023-01-16 22:47:45,719 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,720 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,751 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-3.063,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-3.063,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-3.063,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-3.063,0.000>), took 22ms 2023-01-16 22:47:45,756 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,757 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,785 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-1.948,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-1.948,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-1.948,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-1.948,0.000>), took 18ms 2023-01-16 22:47:45,789 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,790 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,819 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-2.786,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-2.786,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-2.786,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-2.786,0.000>), took 18ms 2023-01-16 22:47:45,841 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-0.557,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-0.557,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-0.557,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-0.557,0.000>), took 18ms 2023-01-16 22:47:45,845 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,846 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,873 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-3.064,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-3.064,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-3.064,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-3.064,0.000>), took 17ms 2023-01-16 22:47:45,878 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,879 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,912 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-1.672,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-1.672,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-1.672,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-1.672,0.000>), took 23ms 2023-01-16 22:47:45,915 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,916 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,949 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-0.836,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-0.836,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-0.836,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-0.836,0.000>), took 22ms 2023-01-16 22:47:45,955 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,956 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,988 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-0.557,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-0.557,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-0.557,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-0.557,0.000>), took 22ms 2023-01-16 22:47:45,993 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:45,994 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:46,024 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-0.557,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-0.557,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-0.557,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-0.557,0.000>), took 20ms 2023-01-16 22:47:46,027 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:46,028 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:46,069 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=4) TranslateOp.(node=<CuraSceneNode object: 'body131471'>,trans.=<0.000,-0.279,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body386024'>,trans.=<0.000,-0.279,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body691307'>,trans.=<0.000,-0.279,0.000>) TranslateOp.(node=<CuraSceneNode object: 'body259049'>,trans.=<0.000,-0.279,0.000>), took 22ms 2023-01-16 22:47:46,075 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh 2023-01-16 22:47:46,075 - WARNING - [MainThread] UM.View.RenderBatch.addItem [166]: Tried to add an item to batch without mesh ... and so on.. cura_loop_stuck.log
  19. einen Support-Blocker auf das Druckbett legen ist eine lustige Idee, danke! allerdings klappt das bei mir nicht, weil in dem Bereich serwohl Support fΓΌr einen anderen Bereich auf der Druckplatte beginnt ich habe es auch eben versucht und der Support-Blocker auf dem Druckbett hat keine Auswirkung
  20. hi, gibt es einen Weg Cura dazu zu bringen das Support-Material am Objekt zu beginnen statt 15cm weiter unten am Druckbett? in den frΓΌheren Versionen hatte ich es mal geschafft, dass der Support einfach an der Wand anfΓ€ngt.. nun habe ich dem Modell schon eine kleine Kante gegeben und mΓΆchte dass das Support-Material dort beginnt
  21. sure, you just can use: M190 S{material_bed_temperature-10} if this is not working use M190 S{(material_bed_temperature-10)} at lease this was working just be aware: if you use M190 to heat to a lower temp first (f.e to prevent a hot nozzle waiting for a hot bed) it takes a bit longer in total because the last 3-4Β° don't get heaten on 100%..
  22. i already played with this settings but the "support blocker" always get's printed here so you mean the support-blocker would need to follow the curve or something like that?
  23. I accept it's a feature, anyway my qustion was how to turn if off with my settings of layer-width and height I don't get holes as my walls bevome better without this extra scin-infill I think this is no part to discuss about, my model was nothing but a sample.. I'll give the support blocker a try, just I never saw the option to change options for the support-blocker? sometimes I'm dreaming of defining different options for a region - but this feature does not exist?
  24. I'like to get it look like this while I need "Top&Bottom" at the real top and bottom
  25. here how it looks like with "Top/bottom pattern" set to to "concentric" "Wall Thickness" is 1.8, "Line Count" is 3 as Nozzle is 0.6
×
×
  • Create New...