jetengineering
-
Posts
8 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by jetengineering
-
-
Hi all,
Firstly thanks for helping, my printer has just stopped work mid print.
I've just completed 4 days of back to back prints and it's stopped on the last part.
The material is PETG.
I've tried heating the nozzle up and moving the filament but nothing will extrude.
The extruder had a large lump on it when it failed mid print. I've removed this carefully.
Thanks for any thoughts on why it's still not printing!
James
-
Thanks buddy, will check them!
-
-
Yes got the fan lowered and it's worked a treat thank you.
-
Will do next print, it's 95% sorted with just the temperature change and the bubble wrap "door".
Some minor lifting but very little comparatively. Thanks for your help.
James
-
Thanks ever so, will take a watch now.
The part is a case for a 5G Router for a maritime system.
The Tabs are my added "Brim" as I've got to use the whole print bed basically.
I've covered the door and sent the temp up, cheers for the tips!
-
Printer stopped extruding mid print
in UltiMaker 3D printers
Posted
Issue found, the material had come off the spool tied a knot and then was still moving in the tube until the point the material had worn thin.