I made fillenium malcon.
Parameters
model: fillenium malcon https://www.thingiverse.com/thing:919475 thanks!
Layer: 0.1mm
height:112.8mm
infill: 10%
Print speed:60mm/s
Travel speed:120mm/s
Print Temp:190℃
Bed Temp:60℃
Bed leveling: auto https://www.thingiverse.com/thing:4831530
time:48hour
robin_nano_cfg.txt
>DEFAULT_ACCELERATION 11 #X, Y, Z and E acceleration for printing moves
>DEFAULT_XJERK 8 #Default Axis-X Jerk (mm/s)
>DEFAULT_YJERK 8 #Default Axis-Y Jerk (mm/s)
At first glance, the speed seems to be too fast, but in reality the acceleration and jerk are so small that it does not reach the maximum speed. Acceleration and jerk values were too small. I should have set it to a higher value.