bernd1000
-
Posts
2 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by bernd1000
-
-
my print size is OK. use the JG Aurora A5 community firmware. But the Brim width is set to 150% (thin like a needle). and all flowrates to 140% to get a proper result. and please tell the community that the initial layer height must be, leveling distance + initial layer height = layerheight. its simply wrong that increasing this value increases adhäsion to the bed. when u choose initial layer height of i.e. 0.25 your true value is 0.25 +0.2 leveling distance. if u increase that 0.4 u`ll get only maggots on the bed.the extruder is hovering 0.6mm over the bed. better reduce to 0.1 for better adhäsion.
JG Aurora A5 printing duration approx. 3000h
Belegung der Maustasten in CURA
in Deutsch
Posted
Leider funktioniert die Funktion "Bild nach unten oder Oben", nur mit gedrücktem Scroll Rad. Drücken und Drehen. Kann man diese Funktion in CURA auf eine andere Taste der Maus umlegen. Bei anderen Programmen z.b Blender geht das ja auch. Danke Bernd