PatD

Thank you! I used your advice, along with disabling the 2nd nozzle and now I have reduced the non-printable area.

We currently running 2 x Ultimaker S5 printers. One is outfitted with the complete S5 pro bundle and one without. I am working on trying to maximize the print bed area. I had added the 1st S5 printer to Cura awhile ago and have a large printable area (see photo 1). More recently, I added the second printer and have a smaller printable area. It seems to me that this is a machine configuration; however, both machines have the same configuration. I am unsure why the non-printable area would be different with the 2 machines?? I have searched for options to increase the printable area and found this suggestion https://support.ultimaker.com/hc/en-us/articles/360013799339-How-to-print-the-maximum-build-volume-in-Ultimaker-Cura; however, these apply to settings directly in the printing profile, which isn't loaded in at the start up of Cura before I put a model on the build plate. I have also read of adding modifications to the starting and ending gcode in the machine setup, but this is not ideal, as the code needs to be updated in every Cura update. Any suggestions???