Hello, guys.
I am having a little bit of a problem when finishing the printing.
It seems that when printing is done, the hot head tries to almost touch the bed (just like when you press the home button in ANET ET4 PRO).
That is causing the hot head trying to go through the piece it just printed.
That problem made clear when I printed a brigde test as the following shows:
The image above shows that the nozzle went through the column .
Other important info:
Start G-CODE:
G92 E0 ; Reset Extruder
G28 ; Home all axes
G1 X0.5 Y20 Z0.3 F5000.0 ; Move to start position
G1 X0.5 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X0.8 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X0.8 Y20 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish
END G-CODE:
M140 S0
G92 E10
G1 E-10 F2000
G28 X Z
G1 Z200.0
M106 S0 ;Turn-off fan
M104 S0 ;Turn-off hotend
M140 S0 ;Turn-off bed
M84
Can someone help me solve this, please?