Jump to content
Ultimaker Community of 3D Printing Experts

javajoeuk

Member
  • Content Count

    3
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. Thanks for all the help thats worked great
  2. 🤣 that will explain it I sholud have read it better this is what I have changed it too and It should work M117 Cleaning... G21 ;metric values G90 ;absolute positioning M82 ;set extruder to absolute mode M107 ;start with the fan off G28 X0 Y0 ;move X/Y to min endstops G28 Z0 ;move Z to min endstops G0 X1 Y0 Z0.15 F9000 ; Move in 1mm from edge and up [z] 0.15mm G92 E0 ;zero the extruded length G1 Y290 E100 F500 ; Extrude 100mm filiment along Y axis 290mm long to prime and clean the nozzle G92 E0 ;zero the extruded length again G1 E-3 F500 ;Retract filament by 3mm G1 X3 Y190 Z15 F9000
  3. Hi I have a tevo tarantula that has start and finish gcode under the printer setting to print a line at the start of each print but its not doing anything. Its printing fine just not running the gcode. G21 ;metric values G90 ;absolute positioning M82 ;set extruder to absolute mode M107 ;start with the fan off G28 X0 Y0 ;move X/Y to min endstops G28 Z0 ;move Z to min endstops G1 Z15.0 F9000 ;move the platform down 15mm G92 E0 ;zero the extruded length G1 F200 E3 ;extrude 3mm of feed stock G92 E0 ;zero the extruded length again G1 F9000 ;Put printing message on LCD screen M117 Printing...
×
×
  • Create New...