I just unboxed and assembled my new Anycubic Mega S 3D printer, and found Cura as the interface software. The first thing it asked me was to select a printer. However mine was not one of the choices. The following are the settings that I was able to glean from the manual... obviously incomplete. Can someone help me correctly complete this?
Machine settings:
Printer
Printer Settings
X (Width) [210 mm]
Y (Depth) [210 mm]
Z (Height) [205 mm]
Build plate shape [Rectangular]
[ ] Origin at center
[x] Heated bed
Gcode flavor [Marlin]
Printhead Settings
X min [20 mm]
Y min [10 mm]
X max [10 mm]
Y max [10 mm]
Gantry height [99999999999 mm]
Number of Extruders [1]
Start Gcode
G28 ;Home
G1 Z15.0 F6000 ;Move the platform down 15mm
;Prime the extruder
G92 E0
G1 F200 E3
G92 E0
End Gcode
M104 S0
M140 S0
;Retract the filament
G92 E1
G1 E-1 F300
G28 X0 Y0
M84
Extruder 1
Nozzle Settings
Nozzle size [0.4 mm]
Compatible material diam... [2.85 mm]
Nozzle offset X [0 mm]
Nozzle offset Y [0 mm]
Extruder Start Gcode
???
Extruder End Gcode
???