[configuration of cura for hybrid 3-D printer having IDEX and laser]

thanks  all of you  .Now let me see what can we do with the help of sources provided by you 

[configuration of cura for hybrid 3-D printer having IDEX and laser]

thanks @Cuq and @GregValiant for reply.  I also had the idea of merging or copy and paste of two files  but I also think Changing the way Cura handles building a gcode file would seem to be much more work than building a single file from two files  that. we need to do some changes in documentation of CURA. Did any of you find anythingh in that direction, then please convey it to me.

[configuration of cura for hybrid 3-D printer having IDEX and laser]

thanks @GregValiant  for your reply ,yes you understand correct , I think the problem is that when we try to work both extruder T1 and T2  at same position in same layer then Cura doesn't allow us because of detection of interference(collision) of profiles of extruders so we have to find in documentation of Cura the file which perform this task and then we have to change, replace or place a new file there to stop this detection . but till now I am unable to figure it out.     

Can you  help me out @GregValiant    or anyone ? I will be very thankfull for this

[configuration of cura for hybrid 3-D printer having IDEX and laser]

hello freinds , actually I am working on project where I have to configure Cura slicer for hybrid 3-D printer  where two independent extruder deposit dielecric and composite material  and a laser is attached with one extruder to sinter composit material . 

assuming laser as extruder how can we make  it in cura that it cover same volume or cordinates  as  cover by composite material. I tried to  import two files of same ,model at same place and assign it to seperate extruders  but it gives wierd results when I Preview  it , It is unclear which part is made by which extruder

Can anyone help me out ,I will be very thankfull  

[Plugin to replace the extrusion g-code with my laser on/off function M126,M127)]

actually I am new to it , are you talking about above nallath github link

 

[Plugin to replace the extrusion g-code with my laser on/off function M126,M127)]

hey anyone find about this if yes please let me know @newdesign  and @xisle. 

or anyone else please. defining g-code for laser attached with extruder to sinter extruded composite

@myterious0104 did you find it?