ARSTAR

Thank you so much.I really appreciate your help.It is difficult for me to solve this problem right now, but I will solve it slowly as you taught me.You're a genius.

Thank you very much for your reply. I don't know what's possible or impossible because I still have basic knowledge. So your reply was very helpful. And I'm sorry I didn't do it, because I had to explain exactly. To explain exactly what I want to make, there is not one heating block in one Hotend. Put 2 heating blocks in 1 Hotend. The reason I'm trying to make this happen is for a much faster output speed. At high output speeds, the filament does not melt properly because of the short melting time when the filament passes through one heating block. Therefore, my plan is to preheat the filament when it passes through the heating block at low temperature and melt it in a short time at the heating block at high temperature. The rough idea is as follows in the following picture. Will this help me get the answer I want a little more?

I looked into the functions of the Cura Master you told me about, but I didn't have the functions I neededIsn't there a 3D printer that has two heaters inside one extruder? Of course, the temperature of the two heaters must be set differently If not, would I have no choice but to revise Cura's code myself?

Thank you very much. I don't know if it's the function I wanted. I'll give it a try.

Hello, I'm a student interested in 3D printers I'd like to make a 3D printer this time But I want to modify Cura because there is a function that Cura does not support 1. Are there many cases where people modify Cura and build it themselves? 2. I'd like to have two heaters in one extruder and one single nozzle, but the Cura can only have one Temperature setting in one extruder I want to modify Cura and make two Temperature settings on one Extruder, is this possible? 3. If possible, could you tell me what to do? I have novice developer-level skills in programming Even if it's hard for you to explain, I am grateful for that. Thank you