Thank you Tang for the awesome instructions!😁
👉in order to use Cura with the Flashforge Creator Pro 2👍
1: Select "Add a non-networked printer>Custom FFF Printer"
2: Enter x(width) 255.0mm, Y(Depth) 145.0mm, Z (Height) 150mm
3: Build plate shape: Rectangular
4: Checkbox: Origin at center, and heated bed
5: G-code Flavor: Griffin
6: Number of Extruders: 2
7: Start G-Code:
M118 X30.00 Y30.00 Z25.80 T0 T1
M140 S{material_bed_temperature_layer_0} ;start bed preheating
M104 T0 S{material_print_temperature_layer_0, 0}
M104 T1 S{material_print_temperature_layer_0, 1}
M107
G90
G28
M132 X Y Z A B
G1 Z50.000 F420
G161 X Y F3300
M7 T0
M6 T0
M6 T1
M651
8: End G-Code:
M104 S0 T0
M104 S0 T1
M140 S0 T0
G162 Z F1800
G28 X Y
M132 X Y A B
M652
G91
M18
9: Under Extruder 1:
Change Diameter to 1.75mm
10: Under Extruder 1:
Under Extruder Start G-Code:
M108 T0
11: Under Extruder 2:
Change Diameter to 1.75mm
12: Under Extruder 2:
Under Extruder Start G-Code:
M108 T1
🍻Happy Printing! 😄