tstone52

Bumping this old thread because I would love to see this feature. I often have to change speeds and want certain speed settings to be proportional to the main "print speed" setting, via a formula. I end up tediously changing every speed manually. It would be awesome to be able to write it with a basic formula. For example, for infill speed you can put "=1.2x"Print Speed"" or something like that. You can just leave infill speed like that indefinitely so every time you change print speed, the infill speed automatically changes as well. Is there any chance we will see a feature like this soon?

Any word on merging this into mainline Cura? I often print things that absolutely need the straight z seam and I'm stuck using this old version of Cura just for those prints. Would be excellent to have this in the new Cura with Arachne.

The ultimaker website has the following description. Should it not say "leaves a gap of 0.025mm on both sides"? Outer wall inset This setting compensates the position for the outer wall, if the line width chosen is smaller than the nozzle. For example: A line width of 0.35 with a 0.40mm nozzle leaves a gap of 0.05mm on both sides of the actual printed line. A compensation of 0.025 is set to compensate for the outermost part. Link to that page https://support.ultimaker.com/hc/en-us/articles/360012512340-Shell-settings