Jump to content

B_Roll

Member
  • Posts

    2
  • Joined

  • Last visited

Personal Information

  • 3D printer
    Ultimaker S5 Pro Bundle

B_Roll's Achievements

0

Reputation

  1. Hi and thanks for your help. It is quite difficult for me to distinguish the motor sound, because on the other side of the wall where the printer is situated, there is the production line so there is always quite an ambient noise from the machines. There is a motor sound when it is retracting, but I guess it's from the filament drive in the front of the station, right where the filament goes in. The rubber barrel where the spool sits on in the back is not turning. The lights are on after reboot All of the spools are Ultimaker spools except one, which is Ultrafuse PAHT CF 15. However, the spool looks just the same except the RFID tag missing. I used Telnet before, but it's been a long time and also I don't know if our company network will let it through...
  2. Hi everybody, After the last few prints, the Material Station fails to wind up material on their spools when it retracts the filament from the printer, so after every print there's huge pile of spaghetti in the Material station. I've rebootet the whole system several times and also updated to the latest firmware(6.5 I believe) and the latest Cura(4.10). Any idea what to do next?
×
×
  • Create New...