id192313

I'm having the exact same issue.

Thank you so much. Relative extrusion have fix the issue. Didn't know this need to be check when installing the new version.

I have this issue where by gcode generated on Cura increases the e-step auomatically. Happened from version 4.7 onward. Right now I'm on v4.11beta. Any help would be appreciated. ;FLAVOR:Marlin ;TIME:1902 ;Filament used: 1.09502m ;Layer height: 0.2 ;MINX:132.993 ;MINY:132.99 ;MINZ:0.2 ;MAXX:167.003 ;MAXY:167.009 ;MAXZ:20.6 ;Generated with Cura_SteamEngine 4.11.0-BETA M140 S50 M105 M190 S50 M104 S200 M105 M109 S200 M82 ;absolute extrusion mode M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk M220 S100 ;Reset Feedrate M221 S100 ;Reset Flowrate G28 ;Home G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up G92 E0 G92 E0 G1 F2700 E-5 ;LAYER_COUNT:104 ;LAYER:0 M107 G0 F6000 X137.872 Y138.074 Z0.2 ;TYPE:SKIRT G1 F2700 E0 G1 F1200 X138.161 Y137.786 E0.01357 G1 X138.837 Y137.167 E0.04406 G1 X139.168 Y136.888 E0.05845 G1 X139.891 Y136.328 E0.08887 G1 X140.287 Y136.047 E0.10502 G1 X140.649 Y135.801 E0.11958 G1 X140.956 Y135.601 E0.13176 G1 X141.691 Y135.162 E0.16024 G1 X142.118 Y134.929 E0.17642 G1 X142.966 Y134.513 E0.20783 G1 X143.52 Y134.272 E0.22793 G1 X143.631 Y134.226 E0.23192 G1 X144.421 Y133.934 E0.25994 G1 X144.696 Y133.844 E0.26956 G1 X145.093 Y133.722 E0.28338 G1 X145.677 Y133.555 E0.30358 G1 X146.611 Y133.331 E0.33552 G1 X146.766 Y133.301 E0.34077 G1 X147.095 Y133.243 E0.35189 G1 X147.354 Y133.201 E0.36061 G1 X147.74 Y133.145 E0.37359 G1 X148.002 Y133.112 E0.38237 G1 X148.759 Y133.043 E0.40765 G1 X149.417 Y133.006 E0.42957 G1 X149.903 Y132.99 E0.44574 G1 X150.797 Y133.011 E0.47549 G1 X151.327 Y133.045 E0.49315 G1 X151.696 Y133.074 E0.50546 G1 X151.798 Y133.084 E0.50887 G1 X152.745 Y133.219 E0.54069 G1 X153.414 Y133.344 E0.56332 G1 X154.472 Y133.596 E0.5995 G1 X154.997 Y133.749 E0.61768 G1 X155.758 Y134.002 E0.64436 Cura 4.11beta Mac Big Sur 11.5 CR-10