Jump to content

ChaseFamous

New member
  • Posts

    1
  • Joined

  • Last visited

Personal Information

  • 3D printer
    Ultimaker S3

ChaseFamous's Achievements

0

Reputation

  1. Hello all, I am still new to printing and have tried a few different models, after printing a dice I made while using ironing I noticed that the top of it actually didn't turn out smoother than it was before. I thought this might be because of the "holes" that are on the top so I decided to print a simple flat square surface to see if ironing does work. I tried printing this 3 times with a few tweaks every single time, but I get a weird blob where the ironing starts. I suspect a few things might be happening but I would like some insight. The issues I think I might have: Extruder temperature too high Nozzle possibly too close to the bed Too much ironing flow I am printing on an Ultimaker S3, will add the curaproject as an attachment. The Dice I was talking about (with ironing on): Without ironing on: The squares with ironing on: First one (default settings with some speed, acceleration and jerk decreased and ironing on) The second one, thinner so I could print it faster. I tried reducing the Ironing flow to 8% to see if it made a difference. The third one (which is also the curaproject.3mf in the attachment), I turned on nozzle retraction at layer change as well and changed some other settings. I hope someone can help me pinpoint the problem I'm having. UMS3_Ironing test.3mf
×
×
  • Create New...