gooddealonly

Cura 5.2.1 Creality CR-10S Pro V2 3D Printer Cura setting, Cooling is Enabled at 100%. I notice the cooling fan was not running when printing. I paused the printing and send a G code M106 which turns on the fan at maximum speed. The cooling fan turns on and runs. I resumed the printing. This verified the fan is working correctly.. Why didn't the fan start running when the printing starts? Thanks.

Is there a setting where the user can store the default extrusion & built plate temperature for the filament. For example, in preference > material, where there are fields for the density, diameter, cost and weight. Is there anywhere to also save the extrusion and built plate temperature? If the user select the material PLA, the two temperature is automatically default to the saved value. Let's say 200 for extrusion & 60 for the built plate? There has been a few times that I forgot to change the two temperatures when I switch from PLA to ABS and back.

Working great! Thanks.

Thanks.

I use the Auto Orientation plugin on Cura 4.13 all the time. This plugin is not on the Cura 5 Marketplace list. Is the Auto Orientation available or the function has been integrated into Cura 5.0

On the monitor page there is the estimated time left. I have to look at the current time and then figure out the actual time of day the job would be finish. It would be nice if the program would simply display the actual clock time of day the job is finished. If the job would take to the next day, it should display the date also. Example: Printing Time: 05:21:37 Estimated time left 04:52:35 The print job will be done 2:45:30 PM September, 16, 2021