davideromeo

Tested and working!

ArcWelder works. Start Optimiser does not work, after installing it reset the settings. It is installed in the Roaming\cura\5.0\plugins folder and not in Roaming\cura\5.0\plugins\StartOptimiser, and also resets all other plugins.

Yes, I also use Sidebar GUI. I hadn't noticed the popup, thanks. The screen I am referring to is exactly that of "Line type" in your screenshot, it is a bit small for me who used PrusaSlicer before. This is a partial example of the line types visible in PS: It is much easier to adjust the settings by displaying all types of lines, especially bridge, overhangs, etc.

Hi, I have been having a problem in Cura for some time now, the top fill becomes inconsistent in many prints, even though there is no real problem under extrusion. As you can see in the second photo, the top is perfect and has no flaws, while in the first and third photos with the vertical holes there are many empty gaps. I'm not good at taking pictures, but the vision issue is much more evident than in photos. In allegato il file con il progetto e le impostazioni di stampa. LK4 Pro, Marlin 2.0.9.3 SolderStation.3mf

Problem with displaying checkboxes on mouse hover in Windows 11. Also, there are many anti-alias issues, especially in the text. Honestly, in version 5 I was expecting more improvements in the GUI, especially with different line types in the preview display. In PrusaSlicer each type of line has its own color and are easily distinguishable, in addition to a report in percentage by weight of the filament used, I would like to see it also in Cura.

When will ArcWelderPlugin be compatible?

Hi, I wanted to know if it is possible to change the direction of the bridge lines in Cura, for example to a 45° angle. Currently Cura fills the deck with lines parallel to the deck walls, resulting in the deck sagging.

Thanks for your advice, actually the problem has reduced quite a bit. In the photo you can see that there are some filaments left, which didn't actually cause any problems, removed with a lighter in seconds. I think increasing the retraction by a little should solve it, I don't want to lower the temperature too much. However, strange that in the Cura preview the shrinkage points in the media are not displayed.

Hi, I've been having various problems with retraction lately, especially with supports. Despite disabling "limiting retractions in the media", there is no retraction in the media, and it continues to produce stringing at every level. As you can see from the photo, the retraction doesn't seem to work in the upper parts of the print either. I recently switched to Cura, and I probably must have done something wrong in the configuration. Can you help me? Thanks Body_2.3mf