AllenZag

OMG I actually never knew that. Thank you very much. I suspected something wasn't right because that's why I did my original post. Nozzle was front left off the bed and that purge line did not seem right to me.Of all the printers I had I always thought the home was set in the Gcode script. Tht's why I asked about how to change it. I copied your original 'how-to' and I'll follow the instructions. Thanks again Allen

Hi Greg sorry I didn't see this until today. I thought I'd get n email notification when someone replied. I didn't actually set the home location. I added the new printed endpoint area. Also now I just installed Cura 5. I do notice that in Home position the nozzle is off the bed front left side. Thank you very much for your reply. Allen

Hello. I am using Cura 4.13.1 and my printer is Geetech Mizar S build is 255x255 on the bed. Home is front left. Actual size of the bed is 260x260. My Start Gcode : G28 ; Auto home G1 Z15 F300 ;Move up slightly M107 ;Off fans G90 ;Switch to absolute positioning M82 ;Extruder absolute mode G92 E0 ;Set position of extruder to 0 G0 X10 Y20 F1500 ;Move to X10 Y20 at 1500mms G1 Z0.8 ;Move Z to 0.8 G1 F300 X180 E40 ;Extrude a line of filament G1 F1200 Z2 ;Raise Z G92 E0 ;Set extruder position to zero G28 ;Auto home I know the G1 is move in straight line. As the Gcode reads the purge line is on X axis too far away from the edge of the print Maybe 20mm or so. What I want to do is move that purge line to the left side with the line on Y axis 10 mm fro the edge off the build plate. 5mm would bring it away from the edge and the other 5mm would be safe and not interfere with the print. My recent printer Kywoo Max did this. That start code is; G92 E0 ; Reset Extruder G28 ; Home all axes G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line G92 E0 ; Reset Extruder G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish The big difference is the Kywoo bed is 300x300 Print area. I a bit scared moving Kywoo's G1 to my Geeetech. Can someone help? You can see what U mean in the photo. Thanks Allen

Hi All of the speed I cannot multiply items on the bed in Cura 4.12.0. I used to be able th right click and click on multiply but now nothing happens. I tried rebooting the computer. I tried installing a new version of cura. I need to print 15 keychains about 1.5" dia. Also When I open a project cura doesn't seem to remember my profile setting Nobody in the Facebook Group seems to know an answer Thanks

Does anyone have a TPU profile I can use with my Kywoo Tycoon Max Direct Drive printer. I used to do a lot of TPU on my Ender 5 and S3D but now I have the Kywoo and exclusively CURA. Thanks for any help. Allen