Mcudnic

Cura 4.8.13 i use it because of this plugin !Or did someone pull the plug on creality cloud from cura ? it worked i januari. Haven't used it since like the 10:th of jan 2023

Cura 4.13.1 I work at a school with design students and teachers. For some reason cura left out parts of the print. The culprit is that thin walls, is not activated ! Many prints have had details missing, i thought that thinner walls than the nozzle width, was the reason, but i was wrong. Could not find nothing about his. So why not post it ! Many of us want to print fine details, and text is by far the worst to print. Our student have made keyrings and nameplates, So no wonder part of the text was missing. Cura is my preferred slicer. I would consider myself to be semipro, and i can build a 3-printer from parts, and have them working with Marlin 1 and 2.0x. I print about 40 details a week periodically and topping at 100 parts per week. I of course ran into this 2 years ago. But with a pc swap, those setting were lost ! That's why i am annoyed over this. If a wall is 0,4mm and the nozzle is 0,4mm. should it not be possible to print small things like text characters, from scratch ? The Machines i use are non networked c10s and 5 others all using cura as preferred slicer. I will turn off that function and show it below hot it affect the print. That would be pic n2. if i check thin walls, this can be printed fully. Not tested it yet though. I will of course inform teachers and student to have thicker parts anyway, to get i bit more stable prints out '

go to material and then click the up top left box ,and check those boxes initial temp and so on. Then you have control over everything. Because the are occasions you need to tweak them. Ran into the same issue! I cannot take pics of this.if you check the boxes it will show the next time you on the the material settings menu