Hi,
I am trying to embed connectors into my print. Previously I used the Print at Height code generator within Cura (V4.13.1) to achieve the result needed. I have an Ultimaker S5 (Firmware 7.0.2)
I have tried several times now to reprint the enclosure with no success.
When the printer restarts the print after the pause the printer display an error of ER65. It would appear that the print nozzle has not been reheated to the correct temperature as when the filament is removed from the machine you can clearly see that the filament has been grind down by the top feed wheel.
I have tried different temps for the extruder whilst paused and minimised the pause time with no luck.
I have attached the G Code and model that I am trying to print.
Any thoughts would be gratefully received.
Many thanks,
Matt
UMS5_Body1.gcode
UMS5_Body1.ufp