DKiefer770

The solution is that Cura does not support machines with multiple monitors! Turn off all but 1 and it works. Welcome to 2022!

Several issues with new build. Tried on Windows 10 (x64) and Windows 11 (x64) 1. Slicing will start then progress through the entire process, but when done interface resets back to "slice", no slicing performed, no preview. 2. Setting wall thickness to 5 lines still produces walls that are only 1 line wide. 2. Attempting to save a new print settings profile (and other operations that require a dialog, like Save project) causes program to hang: Faulting application name: CuraEngine.exe, version: 1.0.0.0, time stamp: 0x63500d47 Faulting module name: ucrtbase.dll, version: 10.0.22000.1, time stamp: 0x00e78ce9 Exception code: 0xc0000409 Fault offset: 0x000000000007dd7e Faulting process id: 0x549c Faulting application start time: 0x01d8e8b6946c34b2 Faulting application path: C:\Program Files\Ultimaker Cura 5.2.1\CuraEngine.exe Faulting module path: C:\Windows\System32\ucrtbase.dll Report Id: e6130dd1-5301-4d61-9795-7d52fd0a1f44

Is there also an item for supports being generated off the print bed?

There is a backlog item for this.

Here is a screenshot of a preview from 4.12.1: And here, same model and all other settings, profile, etc. on 4.13: Note the supports inside the model circled in red and the supports off the build plate circled in purple (I made a different post about this). This is Ender 3, Windows 11. Note that I see a lot of strange things with my CAD programs on Windows 11 (OpenSCAD won't even run without hanging), but I haven't had a problem with Cura before 4.13...

I have the same priblem. 3mf attached.Inside Supports problem.3mf

Using 4.13, slicing a large object, I get tree supports outside the size of the bed and on top of unprintable areas. I have not seen this in older versions. Bug?