Jump to content

hapklaar

New member
  • Posts

    3
  • Joined

  • Last visited

Personal Information

  • 3D printer
    Other 3D printer

hapklaar's Achievements

1

Reputation

  1. @ahoeben Interesting. When I go into the profile settings and view extruder settings, I see this tooltip for Travel speed: This suggests it is calculated to be always 120, except when magic_spiralize (I assume spiralize outer contour) is active. This means travel speed is only related to print speed in vase mode. This seems odd 🙂 Is this calculation hardcoded into Cura?
  2. I'm using Cura 4.13.1 as well. Travel speed seems to be totally unconnected to print speed. I have no idea how this is possible. The printer settings in Cura don't have an entry for maximum speed, only dimensions and extruder setup. Or should I look for these settings in the raw config files? PS as my printer brand isn't listed I always add it as Custom FFF printer. COuld it be that this type has travel speed unconnected to print speed?
  3. I'm trying to understand how certain print settings are calculated. For example the Travel speed. Travel speed is calculated to be 120mm/s regardless of the printing speed I configured, which is currently 250mm/s, even though the tooltip for travel speed says it is affected by printing speed. I can change the printing speed to whatever I want, but travel speed is not changed accordingly. How can I determine why the travel speed is calculated to be 120mm/s? In addition, where can I find how all the other settings are calculated?
×
×
  • Create New...