darkdrago74

Hi @ahoeben again, i found the solution while having some troubles using Labview. The issue is due to the AMD ryzen processor. https://forums.ni.com/t5/LabVIEW/error-loading-lvanlys-dll-in-Labview-64-bits/m-p/4012188#M1147294 The solution purposed is working great and improving/solving the issue about the bad performances. It's really fast now. Extracted from the discussion on the thread: (thanks to those guys) 1) Add a new environmental variable in Windows: Control Panel » System » Advanced System Settings » Advanced » Environment Variables » System variables (the bottom part of the dialog) » New 2) Put MKL_DEBUG_CPU_TYPE as Variable name 3) Put 4 as Variable value (or 5) 4) Confirm OK multiple times to close all dialogs 5) (A Windows restart might be needed.)

Hi sir, Sorry for the late reply but I just dropped a bit the 3d printing because the issue cames back after I wrote my previous message... Tried to fully update the computer as it was new, bios and everything is up to date. I saw cura 5.0 beta was released and I installed it. Unfortunately, the issue is still here. I didn't mentioned it but it seems relevant, the processor is a AMD Ryzen7 with windows11. It's really strange because even my old surface pro3 run it well. Let me know if I can install something so you can have logs easily with the way to use it. Also, rotating the object works instantly like multiplying it, but moving it make the hole cura crash and doesn't respond anymore. And if it respond after 30secs, navigating the menu Options etc is slow as hell and may not respond too. Even when a simple cube calibration is loaded. Octoprint plugging is not installed on cura 5.0 also. Hope it helps

Hi guys, I have an ender3v2 and wanted to add the octoprint RPi upgrade, since i registred the printer, cura was just a slow slow snail (this computer is new also with rtx3060 and windows11). Thanks to your message with the disabling of the plugging listed above, it's working well now, but i don't know if there was a better solution to get back octoprint ? i don't have time to try the zeroconf disabling in the python file. cura 4.13.1 for me and windows11