sandisw

I copied and paste both the start and ending gcode. everything works perfectly !! I really appreciate your help. Thank you so much 😊 this is the result of my 1st benchy printed with cura. overall is good, just need a slight tweaking. material : ABS

Hi, Sorry for the late reply , i just got home. This is the Start Gcode i got from the developer. ; [mm] mode G21 ; absolute mode G90 G28 M42 P7 S100 M190 S<BED> M42 P6 S160 M42 P6 S255 G28 M109 S<TEMP> M42 P7 S255 and this is the End Gcode M104 S0 M140 S0 M42 P6 S0 M106 S0 G28 M42 P7 S0 M400 do you see anything wrong sir ?

i will post my startup gcode on Sunday because i forgot to bring my laptop with me. anyway these are the photos of the machine. i got this machine a couple months ago but it was built 7 years ago.

i have Qubea QD-1X printer. With Kisslicer ( 5D absolute E Gcode ) everything is fine except there are 2 issues that bother me. 1. crowning gap, gap that i can see to on kisslices photo : gap at the trunk corner behind the cabin. 2. visible seams so i decided to give cura slicer a try but my printer just wont start print anything. i copied the start and end gcode from kiss to cura. it can heat the bed , heat the nozzle , home all axis. after that the nozzle is going down to print area but it wont print anything. just stay in the middle of the bed. what Gcode flavour should i use ? Tried marlin & reprap but still not working. please help. Thank you