BaileyKU

Thank you very much. We also did 2.85, S5. If there are any updates, i will keep updating. Thanks! Bailey

Many thanks guys! We keep trying printing with PEBA-S. And we would like to share our experience with you. We are preparing 1.75mm PEBA-S and Flexfill Peba filament printing also. So, I have another question. Which one did you print PEBA-S 1.75mm or 2.85mm? And Which machine did you try? S5? Thank you!

How sweet of you! Thanks a lot 🙂 I will try with your settings. And if there are any questions, i will contact you again.

Hi @Marimakes Thank you for welcoming me 🙂 Did you install the material from the marketplace to slice and print with? -> Yes of course, we already installed and set recommended values. Did you change any settings away from the default? -> Please refer to the files attached. How did you store the material? I see on the website that it is reccommended to store away from light, humidity and heat to maintain the properties of the product. -> We store our filaments in exact conditions. (we control our space with dehumidifier and air conditioner) Do you have pictures of how your quality is not so good? -> Please refer to the files attached. Would you feel comfortable sharing a project file for us? Perhaps I can have someone from the materials team take a look at your problem. A project file contains the printer and settings we need for troubleshooting. -> this is our first time So we just trying with small one. I attached the sample file. Can you check the file? Attached '11' is another structure we are trying now. I appreciate for your reply. And I hope we solve this problem together. cat.stl

Hello, I would like to ask some questions about Kimya Peba-s filament printing. This is our first time to print other materials(non Untimaker filaments). I connected the material to the printer and we completed printing with Peba-s material from Kimya. But the quality is not so good. We keep trying peba-s filament printing under other conditions. So, i would like to ask if you have any experiences in peba filament printing? If so, can you share conditions of printing? It is okay the filament isn't from Kimya. I just wonder about peba filament printing. Thank you.