TomEm

Hi @GregValiant You hit the spot, found the mistake, and it is working again. I did not know that it was editable in Machine Settings! Thanks, that makes it easy, but i think it is also gone after update. Kind regards, Tom

Hello If I adjust the File "vertex_delta_k8800.def.json" the start code, Cura starts with error messages, is this due to a security check by Cura or do I make a text error that causes it to go wrong, I already have it with previous versions of Cura but then all of a sudden it went well. How can I get this done without an error message. Yours sincerely, Tom

Hi @RC-GUY Das ist der Grund!

Hallo @RC-GUY, Mit Ihrer neuen Version sehe ich, dass Sie die unteren Ebenen und die ersten unteren Ebenen auf 8 eingestellt haben, die Standardeinstellung ist 3, jetzt setzen Sie sie auf 0. Grüße, Tom

Hallo @RC-GUY , Ich sehe in Ihrem letzten Screenshot, dass die unteren Ebenen auf 8 eingestellt sind, das habe ich mit 0 gemacht. Aber ich arbeite hier mit Ultimaker Cura Version 5.2.1 und es sieht so aus, als würden Sie mit einer alten Version arbeiten, also mein Rat ist zu aktualisieren. Ich habe auch Ihre .stl in meinem 3D-Programm wieder in .stl umgewandelt, versuchen Sie das. Dies, um zu sehen, ob es Ihre .stl ist. Pylon.stl

Hi @SteveVeritas Look also here: Kind regards, Tom

Hi @SteveVeritas Look here: Kind regards, Tom

Hi @RC-GUY This works Kind regards, Tom

Hi @GChamp I don't know the material, but maybe you can print with the temperature 10 degrees higher? Kind regards, Tom

Hi @chris413 Did you try the plugin, “Auto Orientation”? Works here great. Kind regards, Tom

Hello I made the Dutch translation for "Ghostkeeper, Settings Guide", I have a Pull request there. But the problem is that "Gostkeeper" did not go on with the project, he wants another to take it over. So just if some wan takes the "Settings Guide" over, the nl_NL version can added to the "Settings Guide". I did the translation, but my know how about 3D printing , Cura and Github is to little to take it over, is there somebody at Ultimaker or a other specialist that can do that Job, "Settings Guide" is a fantastic complementation of Cura!!! Hope there is a positive sound coming from here. Here the link to site: https://github.com/Ghostkeeper/SettingsGuide/issues/110 Kind regards, Tom

Hi Sander, I made the Dutch translation for "Ghostkeeper, Settings Guide", I have a Pull request there. But the problem is that "Gostkeeper" did not go on with the project, he wants another to take it over. So just if some wan takes the "Settings Guide" over, the nl_NL version can added to the "Settings Guide". I did the translation, but my know how about 3D printing , Cura and Github is to little to take it over, is there somebody at Ultimaker that can do that Job, "Settings Guide" is a fantastic complementation of Cura!!! Hope there is a positive sound coming from here. Kind regards, Tom

Hi again, The text in the files material_print_temp_prepend.md and material_bed_temp_prepend.md is swaped. I find them here: c:\Users\Tom\AppData\Roaming\cura\5.2\plugins\SettingsGuide2\SettingsGuide2\resources\articles\ Kind regards, Tom

Hi Mari I try to do it again this morning and this time it went well!!! Another question, I am busy to do a translation for nlNL Dutch. I do that for the Settings Guide the Extension, where must I send that if I am finished? Kind regards, Tom

Hi, in the other version of Cura i made a change in the Start of Gcode of my Velleman Delta K8800, but i do it now he starts the program with a ERROR that says, My K8800 is wrong and don't load the printer! So no approval of Cura to change the file! How can I set that the file is OK! Kind regards, Tom