Jump to content

Zanki

New member
  • Posts

    2
  • Joined

  • Last visited

Personal Information

  • 3D printer
    Other 3D printer

Zanki's Achievements

0

Reputation

  1. Oh yeah, I've been having issues with the extruder. Mostly over extrustion that's messing up my prints, but only at a 45 degree angle. I can literally watch it pause for a moment and push out an extra little blob of filiment (this filiment printed out models perfectly on my Tina2). I need to figure that out next, I've only been using this printer for three days. I've fixed the gap issue, I just had the nossle set too high. Totally new to the whole levelling a printer myself, the auto leveller does crap all. See, that's what I thought as well, layer shift, but it's printed two models as one perfectly, which is very confusing. Now, I tried slicing and printing Totoro last night and it printed fine, apart from it over extruding at the 45 degree angle, so I'm thinking cura just can't slice these files. Thankfully it isn't something I've made causing the issue, I just downloaded the file. I've tried editing the file in blender and then printing it, but I get the same results. Ok, so I just attempted to print Pokemon badges, same exact results, it's screwing up badly in the exact same way. I let it put the first layers down for most of them and could see they were off. Nothing symetrical. I really don't understand. No matter what version of cura I use, including the one on the SD card that came with my printer, I get the same results, messed up models. Edit 2: I don't think it's cura causing the issues. I just took another look at the benchy I printed on day one and it has the exact same issues all my other prints have. CE3PRO_Monkey_Talisman.3mf
  2. I have an Ender 3 Neo. There is no profile for my printer on the software so it's been set up as a Ender 3 Pro, with a bit of added code so it uses the auto leveller (I googled which setting to use with my printer). The printer has printed a Bency from the SD card with minimal issues. I cannot print my own files. It seems to duplicate itself and print offset from the other. I've never seen this before, googling the issue is getting me nowhere. I used Cura as my slicer with the Tina2 and had zero issues with it and it just updated to 5.2.1 incase there was an issue with my old version but the issue persists. Please view the attached link for pictures of the issue. The medals are supposed to be a perfect octogon with no gaps/thicker outer walls or duplicated image on the inside. https://imgur.com/a/pZ3hC1f I have already checked the file. I put it into Blender, but even modifying it in there and printing that version didn't fix the issue. It seems to happen with any file I attempt to print.
×
×
  • Create New...