Just looking at the start off the gcode after its sliced and there are comands tell the printer to start heating. dont know why there there as my settings are under it.
;FLAVOR:Marlin
;TIME:1060
;Filament used: 1.1685m
;Layer height: 0.15
;MINX:62.2
;MINY:62.2
;MINZ:0.3
;MAXX:97.8
;MAXY:97.8
;MAXZ:19.95
;Generated with Cura_SteamEngine 4.10.0
M140 S60
M105
M190 S60
M104 S200
M105
M109 S200
M82 ;absolute extrusion mode
G28 ; Home all axis
G1 Z20 X1 Y1 F3000 ; move to wait position
G130 X20 Y20 Z20 A20 ; lower stepper Vrefs while heating
M140 ; Heat Bed
M190 ; stabilize bed temperature
M104 ; Heat Extrued
M109 ; stabilize extruder temperature
G130 X127 Y127 Z40 A127 B127 ; default stepper Vrefs
G1 Z-0 ; Raise Bed ?
G1 E0 100 F900 ; purge nozzle
G1 X140 F1200 ; slow wipe
G92 E0
G92 E0
G1 F1500 E-6.5