Hala

Hello, I have download Marlin firmware2.1.2 from Marlin official website. https://marlinfw.org/meta/download/ I have replaced the default configuration.h, configuration_adv.h files with the files (configuration.h, configuration_adv.h) for Ultimaker2+ from (Configuration folder/ examples/ Ultimaker). I also have changed the motherboard in configuration.h from BOARD_ULTIMAIN_2 to BOARD_ULTIMAKER. The firmware has been compiled and uploaded successfully to the printer. But It is no compatible with UM2+. For example: when I entered G28, I got error on the LCD that shows up (Printer Halted). Please, Any one can help me with that? Is Marlin2.x compatible with UM2+? or is there any enhanced version of Marlin may work fine with UM2+? Thank you

Hello. I have a problem with printing a (.stl) file from Cura with Ultimaker2+ Printer. When I printed a (gode file) from SD card, It has been printed properly. Then, I decided to use Cura to slice a model (.stl) and send it via USB to the same printer. Unfortunately, the printer did not work properly, and the bed did not move up and there is no heating up of the bed. I have tried many .stl files, I got the same problem. Moreover, I printed the same .stl file with Ultimaker3, it has been printed properly. I would appreciate it if anyone could help me to fix this problem. Thank you in advance.