marcosbombi
-
Posts
20 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by marcosbombi
-
-
8 hours ago, Torgeir said:
Hi @marcosbombi,
We can see that the filament does not stick to the bed.
This bed seems not to be the original that's used for this printer, the original has a clear glass with a light gray aluminium heat mat under.
Another issue is the Octoprint, in my opinion this make 3D printing much harder for a beginner as there is too much can go wrong. (And yes, I have a Raspberry pi 4 with Octoprint.) So, it's better to use the printers SD card, if possible?
Why not use the firmware directly from the UM2?
The bed adjustment is a very good way to know an important part of your printer.
What version of Cura are you using? (I saw that you're going to print a glider wing.)
Then; are you using Windows or Linux?
Thanks
Torgeir
I use mac and Windows for ultimaker cura, how can I fix the filament not sticking, I use octoprint because sometimes I have to make a print for friends that can't wait long due to vacation so I use it to print fast, also the printer was gifted to me
-
-
Hey i re calibratd my printbed, but the octoprint is messing up alot now, any help
-
Im trying to print a glider but now its messing up again, i changed the sd on the raspberry pi as it was my gopros sd card
-
oh k
-
also when i try to print directly from the octoprint dashboard it will not extrude the material even when its doing the printing job.
-
okay so i feel like keeping it now, but how do i prevent it from bringing the priming blob to the center, also when i try to print directly from the octoprint dashboard it will not extrude the material even when its doing the printing job.
-
On 4/6/2023 at 9:43 AM, gr5 said:
And in machine settings there should be a tab for "start gcode" and "end gcode". You want the first one. If you have printed fewer than 100 prints you might want to leave things at default. You can read about the gcodes if you google "reprap gcodes" that takes you to a good reference.
Regarding ultimaker2 versus marlin flavors - I prefer the ultimaker2 flavor when printing through SD card. You get a few nice features.
But if you have octoprint working that is even better.
Im saying how do i make it so it stops making the blob
-
ok
6 minutes ago, ahoeben said:Yes. Unless you set it back to "Ultimaker 2" in Machine Settings before exporting gcode. But then you have to set it back to "Marlin" to print succesfully with OctoPrint again. My advice: choose whether you want to print via SD or via OctoPrint.
You could edit the start gcode to not do that prime.
The gcode, how do i do that?
-
One more thing, when it makes the blob or thing in the corner before it starts printing, it will bring it to the print place any help?
-
Btw when i print normally using the sd, will it also use marlin
-
-
I'm taking a look at the plugin and it's not letting me make it auto-select the gcode
-
5 hours ago, ahoeben said:
To produce gcode compatible with OctoPrint, the gcode flavor for your Ultimaker 2+ should be set to "Marlin".
Cura 5.3 currently has a bug that stops the Machine Settings dialog from registering the change of gcode flavors.
Are you using the OctoPrint Connection plugin from the Marketplace? It has an option to set the correct gcode flavor for you.
yes, i have the octoprint plugin
-
Also what gcode should i use for the octoprint
-
3 hours ago, gr5 said:
Next time please include a photo but it sounds like you weren't squishing the bottom layer enough. This is done usually through hardware changes (turning a screw to move the bed closer to the nozzle). Unless you have auto leveling.
I did re level it, also i have an issue due to when i print using octoprint it will move the extruder to a place it can not go and when i get it working it will mess up, like cutting corners and bringing the filament it should print in the corner with it, i have not tested the octoprint after the reset
-
Also, can the printer use the stander ultimaker gcode?
-
Yea in new to 3D printing as i just got my first one, i did another print last night and the were no errors, im just having issues with octoprint.
-
Hello, when I was setting up octoprint on my ultimaker2+ and when I switched the gcode to reprap it started messing up and cutting corners, I reset it and calibrated again, now when I was making a cube the base got stuck on the extruder, can someone help me?
Octoprint
in UltiMaker 3D printers
Posted
Yes, I save time by doing that, I use Ultimaker Cura 5.3.0, and I have printed successfully with this printer, the print bed is a buildtak flexplate, I use lightweight PLA, and i use 200 degrees.