Krinthos

Is there a way to set the distance for the prime tower via calculation? Cura throws it into the upper right corner. I know I can set a value manually but I dont want to type that in for every print I attempt. My printer originally came with Luban that lays out your objects then places the tower within 5 cm or so of the top of the print. With a 400 x 400 build plate thats a lot of wasted time moving between the print and the tower.

I am trying to dial in for stringing, which setting trumps the other. Filament settings that are set for specific loaded filament or the print settings for the sliced profile? If filament is set at 5mm and retraction speed of 35mm/s and the print profile is set for 2mm and 20mm/s, and you slice the stl, what will the retraction actually be? Next, can you set up different print and travel speeds for a dual extruder based on the material in use? Another words I want to print slow on my PLA 30mm/s and Faster 50mm/s on my PVA or Break away PLA, as I want better print quality and not really care what the support looks like. Problem is when I try and set it in the print profile it over writes the other nozzle also. Thanks in advance for the information.