Jump to content

luc_vienna

Member
  • Posts

    2
  • Joined

  • Last visited

Personal Information

  • 3D printer
    Other 3D printer

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

luc_vienna's Achievements

0

Reputation

  1. It is hard for me to reproduce. After going to Cura 5.3.1, i started having a problem, an error when printing with Klipper. On ALL my printers (CR10 S pro, Ender 3 S1 pro) It stopped printing before it had really started. I found the error. In my printer start sequence I have added following line: BED_MESH_PROFILE LOAD=default{material_bed_temperature_layer_0} This used to translate in the gcode to: BED_MESH_PROFILE LOAD=default62 as I have a Mesh profile called default62, it would load and use it and it would work fine. Now i checked the gcode and it reads now: BED_MESH_PROFILE LOAD=default62.0 And that one does not exist. So what I did is I created new profiles with the .0 at the end. default62.0 for PLA, default70.0 for PETG etc.. it worked for a day or two.. suddenly the same error: I checked the gcode again.. and now it was back to default62 instead of default62.0 (in the meantime I had erased the profiles without the .0). It seems that depending what printing profile i am using, it translates {material_bed_temperature_layer_0} to 62 or 62.0 As a momentary workaround i have now saved both mesh profiles, default62 and default62.0, but it is annoying not to know when it changes the output. (its probably a difference between float() and int() somewhere. I had suspected that the printing profiles I had created in earlier versions of cura keep the 62, and that newly created profiles in cura 5.3.1 add the trailing .0 But it seems that i am wrong: i have just created a new profile, and it has NOT the trailing .0 Please help if someone knows what is going on. YES I know i should write a completely different startup in a klipper macro, but as fast solution this has worked fine and was working for more than 6 months now. I can live with the doubled mesh profiles, but it would be a lot easier and give me a better feeling to know when it does one thing, and when the other. Luc
  2. Hallo, wahrscheinlich mache ich etwas falsch. Ich habe 2 drucker die ich auf Klipper umgestellt habe. da ich nicht wusste ob es funktionnieren würde habe ich zb bei meinem Creality Ender 3 S1 pro, einen neuen Drucker erstellt, und dann herumprobiert. Der heißt nun Creality Ender 3 S1 pro #2. (weil ich ja schon den anderen mit marlin firmware, drin habe) soweit so gut. Ich habe mich gespielt, eingestellt, frische start sequenzen, profile etc. gemacht... mit moonraker verbunden, usw... und jetzt würde ich ihn gerne umbenennen. Auf zb Klipper Ender 3. So kann ich, wenn ich wieder die alte firmware draufspiele, einfach wieder auf den anderen gehen und muss nichts anderes umstellen. Profile hab ich auch neue erstellt.. alle mit prefix klipper - . Dachte ich. Plötzlich kann ich nicht mehr den namen ändern!!!. das "rename" ist ausgegraut. Sowohl beim einen als auch beim anderen drucker. Komischer weise sind andere drucker, die schon lange drinn sind, (mindestens seit cura 4.7) Nicht ausgegraut, und ich könnte sie umbenennen. Was muss ich tun um den drucker umzubenennen, und nicht einen neuen installieren müssen und alles neu machen. (mir ist klar dass ich einen neuen drucker installieren könnte und ihn dann nennen wie ich will, aber ich will vermeiden wieder zwei wochen zu vertun. Screenshots von den beiden aus gegraut und nicht ausgegraut.. den den ich renamen kann, habe ich vor über einem jahr erstellt. den Creality Ender 3 S1 pro #2 erst vor zwei wochen. wäre für jede hilfe dankbar. Luc
×
×
  • Create New...