Timini

Wow thank you so much for your help, I'm currently printing it in a strange position without support and it works fine, but it won't be in the correct position to withstand the force I'll apply to it...I will try what you suggest Where do you live ? Technically, here in France, it is legal up to 25 km/h, but it is kinda dangerous to drive that slow in the traffic, so people do what they have to do... Riding an EUC is really not a big deal, you'll swear a lot the first 2 hours, but once you taste it, there's nothing like it... Tim 🙂

Hello, I don't print any support, including skirt, so that's why 🙂 Thank you very much for your analysis and the time you take to help me 🙂 AU20_begode_master_handle.3mf Here's the file you asked

Hello, I now have a very strange situation that I'd like to solve. I'm printing a fairly large piece, a handle for a very heavy electric unicycle. Here's the expected result with the gcode Here's the first layer according to the gcode: Everything seems normal here. However when I go to print it, the first layer looks like this: The rest of the printed object went as expected. Even reslicing, updating the fw of the printer (alfawise U20, a CR10 clone) does nothing. I have this printer for nearly 6 years and never gave me any issues before... If I reposition the print 180° along the z axis, it goes like this : It still shifts, but only one of them in another direction... I tried everything but can't make it work. The gcode and stl are her at the end. Thank you very much for your much needed help, Tim AU20_begode_master_handle.gcodebegode_master_handle.stl