Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Posted · Slicing Problem

Since three weeks I am quite successfully printing with my ultimaker - and I am loving it! :D

For slicing I use Cura. I tried RepG, too, but Cura simply is better. Great software! 8-)

But now I encountered my first problem with Cura that I cannot solve on my own. I have designed a thin wall grid (0.4mm) and wanted to slice it with cura.

This is what I want:

grid1.jpg

And this is what I get:

grid2.jpg

... :?: ...

You can find the STL-file and the gcode in this ZIP-archive.

Maybe someone out there has an idea, what I am doing wrong.

  • Link to post
    Share on other sites
    Posted · Slicing Problem

    Simply put, it's the thin wall problem. Thin objects are currently very hard to slice with the implementation found in Cura. You could try making the walls 0.5mm in width to see if that helps.

  • Link to post
    Share on other sites
    Posted · Slicing Problem
    But now I encountered my first problem with Cura that I cannot solve on my own. I have designed a thin wall grid (0.4mm) and wanted to slice it with cura. Maybe someone out there has an idea, what I am doing wrong.

    You are not doing anything wrong, cura does.

    change your nozzle size in Cura to 0.35mm, and see if that helps

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...