Jump to content
m2tts

No support generated under interior overhangs.

Recommended Posts

Posted · No support generated under interior overhangs.

I'm trying to print a part that has snap features, but overhanging ledges that are inside the part are not getting support generated under them. How do I get Cura to make these?

5a330e7b458cb_NoSupportNormalView.thumb.png.5a7cbf727a48f78f64996cb10ce86592.png 5a330e7bc6f17_NoSupportLayerView.thumb.png.9de8e653a4cc003c0b2d650c97ba8cf3.png

Thanks

5a330e7b458cb_NoSupportNormalView.thumb.png.5a7cbf727a48f78f64996cb10ce86592.png

5a330e7bc6f17_NoSupportLayerView.thumb.png.9de8e653a4cc003c0b2d650c97ba8cf3.png

Share this post


Link to post
Share on other sites
Posted · No support generated under interior overhangs.

click the little white box behind the "everywhere" support setting, this will take you to the expert settings. Look at what angle is noted there, I guess the default is 60. Change it to zero and look if something changed in the layers view.

Share this post


Link to post
Share on other sites
Posted · No support generated under interior overhangs.

If you're the one who designed the part I'd advice you to just go ahead and create support yourself, it'll give you less head aches. I think a thin, 0.5mm, wall from the lip of the snap feature down to the rest of the model with a 0.2mm spacing on "each side" would allow the printer to bridge the rest on its own and it will remove with basically no trace.

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!