Jump to content
Sign in to follow this  
ian

Ooops can some one help me get a replacement ?

Recommended Posts

Posted · Ooops can some one help me get a replacement ?

I was moving my ultimaker from one office to my home to use it for the weekend. Big print project and I wanted to do the finisging touched here.

anyway, I was cleaning it up a little and spotted that one of the small tightening screws in the belt pully was missing.

I have just spent the last 40 minutes looking evey where and cant find it. :oops: :oops:

the belt pully is moving during printing and thats not really good.

can some one tell me where i can get a replacement fast ??

thanks guys.

Ian :)

Share this post


Link to post
Share on other sites
Posted · Ooops can some one help me get a replacement ?

IKEA.

it is a M4/0.7mm set screw, which is also used for in the DEKA/DIGNITET curtain wire system, and you can get a single one at the service desk, asking nicely. but regular hardware stores should cary them as well.

if all fails, cut off 5-6mm from a M4 screw, and cut a slot for a flathead screwdriver.

Share this post


Link to post
Share on other sites
Posted · Ooops can some one help me get a replacement ?

Just take the set screw from the pulleys on the driven axle and put them on the pulleys on the driving axle. The driven axle doesn't NEED to have the pulleys rigidly attached. I'm running without those four screws (two per driven axle) and it works fine.

Share this post


Link to post
Share on other sites
Posted · Ooops can some one help me get a replacement ?

thanks for your help !

I was able to buy a bag of 25 perfect replacement screws for 5 euros on german ebay :-)

So lots of extra backups for these little guys :-)

thanks for the help.

Ian

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 98 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!