Jump to content
gluetools

Cura & Ultimaker Orig. prints 25% smaller!

Recommended Posts

Posted · Cura & Ultimaker Orig. prints 25% smaller!

Hi Everyone,

I have a really strange problem with STL that I generated from my Solidworks package.

When I import the STL into Cura, I have to rotate the model 90 deg. to have it positioned in a printable fashion.

Looking at the model using the "Scale" settings panel, all of the dimentions look right.

However, upon printing the model, the actual physical dimensions are about 25% smaller than the STL itself.

(eg: If I have a 20mm tube bring printed, it actually prints at 15mm.)

Can anyone make a suggestion as to why this might be happening?

I am building a tube that is using a 1mm shell, 30% infill, with the latest version of Cura and firmware. (Cur 15.04, with the latest firmware uploaded.)

Thanks in advance!

bob.

Share this post


Link to post
Share on other sites
Posted · Cura & Ultimaker Orig. prints 25% smaller!

Almost all my parts come from SW, and I have never seen this. To export when I am done modeling, I do a 'save as' *.stl. If I mess with anything during export, it would be the mesh density, but I rarely do that since long ago finding a sweet spot. There is also a 'settings' dialogue in this save process for other conversion factors. Check out these settings to make sure they are not defaulting to something other than 100% scale.

Hope that helps.

Matt

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Survey: Understanding your workflow
      Interact with future concepts and aim to collect your feedback and opinion. In particular, if this would/could be a welcome addition to your 3D printing workflow. Interested?
      • 0 replies
    • Coronavirus: Let's do our part
      Through this post I would like to further explain what we are doing, and what you could be doing. 
      Our efforts consist of 2 layers. First; connect medical institutions and hospitals to (local) 3D Printing hubs to help them print parts of which a 3D model already exists. And second, contribute to design the necessary part and then have it printed via a (local) 3D printing hub. Experts are available from within Ultimaker and from within our network of 3D printing experts.
        • Like
      • 49 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!