Jump to content
Cura Connect | Survey Read more... ×
Ultimaker Community of 3D Printing Experts
jens

I want some z-offset ...

Recommended Posts

Hi forum, world, everyone,

can I tell cura to start the print not at bed level but, say, a few Millimetre above?

(Man, why would you ever want to do that?! ...because I use some filaments that don't stick to my print bed, not to the glass, not to a sheet of buildtak, not to any kind of glue ... and only once in a full moon, when processed with utmost care, encouraged with nice words even and generally pampered, it might stick to a bonding layer of less-hard-to-please material. I used to fiddle a few centimetres of that bonding material into the bowden tube before the actual material for the print. That procedure is a hassle and, easy it may seem, won't give equally good/bad results. Soooo, I want to pre-print the bonding layer independently and than switch material ...)

Share this post


Link to post
Share on other sites

Maybe you can add some gcode

You will need to set it in the start g code.

For example:

G1 Z(number here) // moves bed

G92 Z0 // set this position as 0 for z

Not tested but I think that should work?

Share this post


Link to post
Share on other sites

I pointed you to s3d because it has the option you want. Ofc cura someday will have that too. But to have it 'now' it's your best chance. Also the lastest version added a lot of stuff (that looks like 'inspired' to say the least) that make's it even more cura-friendly. Anyway cura still it's my first choise to print&run. On s3d you must give him a very clean stl and learn how to use the options but when you do, it's worth the money. Specially if you want to do stuff that it's a bit less normal. Like multiprocess, scripting, getting a perfectly clear first layer without scraches. Etcetc

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Architect Design Contest | People
      The goal of this contest is to design a set of people figurines that could be used in such a project to make an area, office or mall seem populated. 
      Think of different types of people in different environments, like walking people, people standing still, working people, and both men and women.
       
      • 31 replies
    • Taking Advantage of DfAM
      This is a statement that’s often made about AM/3DP. I'll focus on the way DfAM can take advantage of some of the unique capabilities that AM and 3DP have to offer. I personally think that the use of AM/3DP for light-weighting is one of it’s most exciting possibilities and one that could play a key part in the sustainability of design and manufacturing in the future.
        • Like
      • 3 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!