Jump to content
Ultimaker Community of 3D Printing Experts

New Cura, Overriding settings !?


Recommended Posts

Posted · New Cura, Overriding settings !?

I generate a file from Cura 15.06.01 to a SD card.

Then I open the file in my UM2 and get the following warning: "This file will override machine setting with setting from the slicer". If I ignore the warning and continue, it starts printing right away, but temperatures are set to zero, and the head starts moving in the XY plane without moving the build platform up!.

The same STL file works well when I use it under the old Cura software.

  • Link to post
    Share on other sites
    Posted · New Cura, Overriding settings !?

    The UMO wants settings such as temperature in the g-code. The UM2 wants this set on the machine. If the um2 sees a temperature setting in the g-code it will give this warning.

  • Link to post
    Share on other sites
    Posted · New Cura, Overriding settings !?

    ;Generated with Cura_SteamEngine DEV

    ;LAYER:0

    M107

    G0 F9000 X87.493 Y71.263 Z0.299

    G0 X90.218 Y69.590

    ;TYPE:SKIRT

    G1 F900 X91.692 Y69.478 E0.17680

    ............

    G1 F3000 X92.503 Y101.554 E4130.59734

    G10

    M107

    G0 F9000 X92.503 Y101.554 Z23.000

    M104 S0

    M140 S0

    ;Retract the filament

    G92 E1

    G1 E-1 F300

    G28 X0 Y0

    M84

  • Link to post
    Share on other sites
    Posted · New Cura, Overriding settings !?

    It could be that the m104 is the problem; it sets the temperature to 0. If you remove the m104 command and the m140 command, do you still get the errors?

  • Link to post
    Share on other sites
    Posted · New Cura, Overriding settings !?

    the M104 and M140 is part end code? So those should be after the "G1 E-1 F300"

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...