Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Posted · Pls try to print it

The form1+ has much better resolution than the Ultimaker. But if you really want to try it, you should use 3dhubs.com. That website will allow you to find an individual to print something for you using any type of printer you choose. There is probably someone even nearby where you live and you can go visit the person and the printer when your part is ready and you can discuss 3d printing issues with that person.

  • Link to post
    Share on other sites
    • 3 weeks later...
    Posted · Pls try to print it

    I have found that you can set nozzle size to lower values than the actual nozzle size by about 25% - so .3mm for a .4mm nozzle and 0.2 for a .2mm nozzle and so on.

    This will look even better if you do it with 2 colors like this:

    DSC_2035.thumb.JPG.5511b094b4af5ed6c0e4ef8e970099bc.JPG

    dcDSC_9083.thumb.JPG.bab9c1b7d42e1611d3cd33d2e675ef66.JPG

    DSC_2035.thumb.JPG.5511b094b4af5ed6c0e4ef8e970099bc.JPG

    dcDSC_9083.thumb.JPG.bab9c1b7d42e1611d3cd33d2e675ef66.JPG

  • Link to post
    Share on other sites
    Posted (edited) · Pls try to print it

    I made a post a few weeks ago about using the nozzle to go 1.2 times less it's size on simplify3d (I bet on cura this it's also easy to do) https://ultimaker.com/en/community/view/16881-really-tiny-little-details-with-04-nozzle-s3d-umo-

    I'll try to print your file tomorrow with a 0.4 to see how it looks but seems hard without a 0.25 nozzle

    Edit. Wow this it's a hard think to print. Will try anyway

    Edited by Guest
  • Link to post
    Share on other sites
    Posted · Pls try to print it

    @gr5

    Layer .06

    Temp 230 normal i use 220 for this Material

    Speed 30-40mm/s

  • Link to post
    Share on other sites
    Posted · Pls try to print it

    Noted! If someone else ever asks I will point them to this thread plus I noted it for myself if/when I ever try it.

  • Link to post
    Share on other sites
    Posted · Pls try to print it

    So what is the peg you can print with a UM2?

  • Link to post
    Share on other sites
    Posted · Pls try to print it

    peg?

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit

        On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
        • 7 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...